no image

VLX-Air (Complete Wireless System)

Designed specific for Violin and Viola

$759.00
Save $0.00

The VLX-Air is a side body mounted complete wireless system for violin, designed for superior performance and reliability. which includes the Evno Air wireless system.  At any time, you also have the option to add the PS95 and the various optional cables for hardwired and wireless use with other major brands, making your Air package very versatile.

Compact yet powerful professional wireless system, perfect for travel. Complete with 1/4 inch output ideal for microphone inputs and D.I. boxes.  The Air system is ideal for quick setups and travel while maintaining a high sonic quality in combination with an Evno designed microphone.  Using the same technology as the W1 and W2 systems the Air is Evno’s compact version.  Folding antennas and a small footprint allow for portability in a compact setup.  Powered by a provided 9V power supply the system also offers a battery option for power.  Using 2 (AA) batteries in the receiver powers the system for 4 hours of continuous use in situations where the power is not available making it possible to use the system in remote locations as needed.  

The Air system is available in the 900-928MHz range for the United States, Brazil, Canada, and other free frequency regions while the 823-832Mhz range is setup for most territories in Europe. **see additional chart below for more information. 

The Air is a 99 channel system, the channels are changed via a sync process that sends the channel change from the receiver to the transmitter and can be changed in seconds as needed.  Compatible with A1, A2, AH, and A4 transmitters *dependent on region and availability. 

The VLX is the ideal choice for solo performances and principal soloists across various genres, from classical orchestras and jazz ensembles to bluegrass bands. This versatile system can be used in both low and high-volume settings.
The EVNO VX-CL clamp features a robust and sturdy design, ensuring it stays securely in place. It allows for quick and easy removal and can be repositioned on the instrument as needed. The microphone’s slim body fits into the clamp for a strong hold, and its right-angle design directs the gooseneck towards the sound source, allowing the microphone head to be adjusted to various positions. The clamp is easy to attach and detach from the instrument and is heavily padded with recessed rubber to prevent damage. It tightens with a thumb screw, and a secondary thumb screw secures the microphone's body in the slotted provision. The clamp can open from 33.4mm (1.3 inches) to a maximum of 50.8mm (2 inches).

The Air system is shipped with an aluminum carrying case for protection however is small enough to pack in a horn case or carry-on for ease of travel.  The system in combination with an Evno microphone produces the most natural reproduction of an acoustic instrument on the market. 

The Evno VLX-Air Wireless System offers a complete package for musicians seeking a portable, high-quality wireless solution for violin and viola. The system includes all necessary components to ensure a seamless and reliable performance experience. 

  • Complete Wireless System

    Comes with Air Wireless System

  • Compatibility

    At any time add the PS95 for wired use or use with other major brand wireless

  • Side Mounting

    Includes VLX-CL study mounting clamp

  • Violin and Viola

    1st choice recommendation
Quantity

  • Main Features

  • Description

  • Specs 

  • Included

  • Setup and Configuration

  • Frequency by

    Region

Evno Air Wireless System
≈ Compact size receiver for easy travel
≈ Aluminum case with foam packing included
≈ Receiver powered with included 9V power supply or 2 - AA batteries
≈ Perfect for pedal board mounting or next to you on stage
≈ UHF with 100 selectable channels - region dependent
≈ 1/4in (6.3mm) output
≈ Diversity antenna system with two built in antennas
≈ 80-meter (262ft) Range
≈ IR Sync from receiver for quick channel changes
≈ Air and A1 transmitter compatible with W1 and W2 receivers (region dependent)
≈ Compatible with A1, A2, A4, & AH transmitters
≈ LCD Display shows frequency, audio, and RF signals

Description

The Evno Air is a compact yet powerful professional wireless system, perfect for travel. Complete with 1/4 inch output ideal for microphone inputs and D.I. boxes.  The Air system is ideal for quick setups and travel while maintaining a high sonic quality in combination with an Evno designed microphone.  Using the same technology as the W1 and W2 systems the Air is Evno’s compact version.  Folding antennas and a small footprint allow for portability in a compact setup.  Powered by a provided 9V power supply the system also offers a battery option for power.  Using 2 (AA) batteries in the receiver powers the system for 4 hours of continuous use in situations where the power is not available making it possible to use the system in remote locations as needed.  


The Air system is available in the 900-928MHz range for the United States, Brazil, Canada, and other free frequency regions.

 

The Air is a 99 channel system, the channels are changed via a sync process that sends the channel change from the receiver to the transmitter and can be changed in seconds as needed.  Compatible with A1, A2, AH, and A4 transmitters *dependent on region and availability.

 

The Air system is shipped with an aluminum carrying case for protection however is small enough to pack in a horn case or carry-on for ease of travel.  The system in combination with an Evno microphone produces the most natural reproduction of an acoustic instrument on the market.

 

The Evno Air Wireless System offers a complete package for musicians seeking a portable, high-quality wireless solution for their Evno Microphone. The system includes all necessary components to ensure a seamless and reliable performance experience.

Receiver:
    •    Frequency Range: 902-928 MHz
    •    Receive Sensitivity: -110 dBm (sinad ≥30 dB)
    •    Signal/Noise Ratio: >105 dB
    •    Power Supply: DC 12V / 500 mA
    •    Audio Output: 1- 1/4 inch
    •    Antenna:  Detachable, Dual

Transmitter:
    •    Frequency Range: 902-928 MHz
    •    RF Power: 10 mW
    •    Microphone Type: Condenser
    •    Directivity: Cardioid
    •    Deviation: ±48 KHz
    •    Antenna: 1/4 wave length wire type
    •    Battery Voltage: 1.5V (1x1.5V AA Battery)
    •    Power Consumption: 14 hours, battery-dependent

SYSTEM SPECIFICATION:

  • Comprehensive Performance
  • Frequency Range: 902-928MHz, 823-832Mhz
  • Modulation Mode: FM
  • Dynamic Range: >100dB
  • Frequency Response: 60Hz-17KHz±3dB
  • Total Harmonic Distortion: <0.5% at 1KHz
  • Signal/Noise Ratio: ≥108dB 
  • Distance: Up to 250 feet / 80 m 
     

Each package includes:
    •    Instrument-specific microphone: Tailored to the acoustic properties of the specific instrument.
    •    Complete Air Wireless System: Ensures high-quality wireless audio, with Diversity receiver, and attached antennas

  • Air Compact Receiver: For robust and reliable audio reception.
  • 1/4 Inch (6.35 mm) Audio Cable
  • Power Adaptor: Ensures consistent power supply. Optionally powered by 2 (AA) batteries.
  • User Guide: Comprehensive instructions for setup and use.
  • Rugged Aluminum Carrying Case: Durable and protective for easy transport.
  • Evno A1 Wireless Clip-On Instrument Microphone Transmitter: High-quality audio transmission belt pack-free design.

Setup and Configuration
    •    Power Supply: Includes a 9V power supply for easy setup.
    •    Channel Selection: Features 99 available channels that can be quickly changed using an IR sync process, allowing for rapid adjustments on stage.
    •    Compatibility: Can be used with up to 5-6 systems simultaneously, making it ideal for horn style bands. Compatible with other Evno systems (Air, W2) and transmitters (A2, AH, A4), depending on region and availability.
    •    Frequency Ranges:
    ◦    900-928 MHz: For the United States, Brazil, Canada, and other free frequency regions. *See additional information for all regions including South America.

902-928MHz Countries of operation:

Australia (915-928MHz)
Brazil (902-907, 915-927.75MHz)
Canada
Columbia
Costa Rica
Dominican Republic
Ecuador
Guyana
Hong Kong (923-925MHz)
Indonesia (923-925MHz)
Mexico
New Zealand (915-928Mhz)
Paraguay
Peru
Puerto Rico
South Korea (925-928)
Venezuela
United States of America

Craftsmanship and Features

Evno Air Receiver

Compact yet powerful professional wireless system, perfect for travel. Complete with 1/4 inch output ideal for microphone inputs and D.I. boxes.  The Air system is ideal for quick setups and travel while maintaining a high sonic quality in combination with an Evno designed microphone.  Using the same technology as the W1 and W2 systems the Air is Evno’s compact version.  Folding antennas and a small footprint allow for portability in a compact setup.  Powered by a provided 9V power supply the system also offers a battery option for power.  Using 2 (AA) batteries in the receiver powers the system for 4 hours of continuous use in situations where the power is not available making it possible to use the system in remote locations as needed.  

Evno A1 Transmitter

Beltpack free transmitter clips to an Evno Microphone.

Air Controls

Evno Air Case

Included with an Evno Air Wireless System

VLX-CL Clamp

Lightweight aluminum clamp allows for quick instrument changes. The VLX-CL clamp is designed to clamp to the side of the violin or viola.  The clamp opens from 33.4mm / 1.3 inches to a max of 50.8mm / 2 inches. A tightening screw snugs up the clamp on the instrument.  Padded feet cushion the clamp to not damage the instrument. Easy to take off and on.  The microphone secures by the narrowed section in the body to the VLX-CL clamp and allows for placement of the microphone in many positions.

Additional Recomendations

EVNO FEATURED ACCESSORIES

PS95 & Ta4 Cable
PS95 & Ta4 Cable

Add the PS95 for a hard wired setup.

 

PS95 & Ta4 Cable

PS95 & Ta4 cable work with all Evno microphone to use the microphone hardwired.
$140.00
$179.00
Windscreen - Small

Extra Windscreen / Replacement

 

Windscreen - Small

Evno windscreens are available in two sizes, tailored to fit the two different sizes of capsule shells. These windscreens are included with each microphone but use is optional designed to protect the microphone diaphragm from gusts of air, which can occur in windy conditions. They are particularly beneficial for more aggressive players who produce higher volume levels, as the resulting wind stream can be on occasion be noticed. The windscreens help enhance sound by reducing breath noise. Conversely, for softer players, the breath noise produced on certain instruments may be a deliberate part of their sound, making the use of a windscreen less desirable.


Evno windscreens come in two sizes to accommodate different microphone capsule shells:

WS-SM: - Small Size Windscreens
Compatible with the following models:
    •    FX
    •    GTX
    •    CLX lower
    •    CHX
    •    VX
    •    SPX1
    •    SPX2 lower
    •    BSX
$12.00
$13.00
Ta4 Cable - Evno to Shure & PS95 Power/Preamp

Extra Ta4 Cable / Replacement

Ta4 Cable - Evno to Shure & PS95 Power/Preamp

EVNO Microphones are designed to be versatile and compatible with a range of wireless systems through the use of specific cables. It is crucial to use the correct cables to ensure optimal performance and to avoid damaging the microphone capsule. 


Evno Microphone Systems makes it possible to use a wireless system from other major brands. Shure, Sennheiser, AKG, and McCormick are all compatible with an Evno microphone. Note: These options operate with a traditional belt pack style transmitter and only an Evno Wireless system offers the belt pack free option. 


The optional OR replacement cable is setup for the customer that already owns a wireless system from one of these brands. The Ta4 is also compatible with the PS95 Preamp / power supply for hard wired use.  

  • Standard Cable: EVNO TA4
    • Connectors: 3-pin mini XLR (microphone side) to 4-pin mini XLR
      Uses: 
    • Connects EVNO microphones to the PS95 preamp/power supply.
    • Connects EVNO microphones to Shure wireless belt packs.
    • Connects EVNO microphones to EVNO A2 wireless belt packs.

      Important Note: This is the standard cable and substitutes should not be used as they could damage the microphone capsule.
$49.00
$79.00
3.5 Cable - Evno to Sennheiser

Add a cable for use with Sennheiser wireless.

3.5 Cable - Evno to Sennheiser


3.5 Cable - Evno replacement cable for Sennheiser Wireless Systems.

EVNO Microphones are designed to be versatile and compatible with a range of wireless systems through the use of specific cables. It is crucial to use the correct cables to ensure optimal performance and to avoid damaging the microphone capsule. 


Evno Microphone Systems makes it possible to use a wireless system from other major brands. Shure, Sennheiser, AKG, and McCormick are all compatible with an Evno microphone. Note: These options operate with a traditional belt pack style transmitter and only an Evno Wireless system offers the belt pack free option. 

The optional OR replacement cable is setup for the customer that already owns a wireless system from one of these brands.

  •  EVNO 3.5
        ◦    Connectors: 3-pin mini XLR (microphone side) to 1/8in locking connector.

  • Uses: 
        ◦    Connects EVNO microphones to Sennheiser wireless systems with 1/8-inch (3.5mm) locking connectors.
$49.00
$79.00
Evno O-Rings (Bag of 6)

Replacement O-rings.

Evno O-Rings (Bag of 6)

Replacement O-Rings for Evno Microphones

EVNO Microphones are equipped with O-rings that are part of the suspension system, providing stability and isolation for the microphone capsule. Replacing and adjusting the O-rings on your EVNO microphone is a quick and straightforward process that can be done without tools. Regular maintenance of the suspension system ensures the microphone performs optimally and remains stable during use. O-rings take years to deteriorate.  If you live and perform near salt water the breakdown of the O-ring can be quicker.  Replacement O-rings are readily available in the EVNO store, allowing you to maintain the high standards of your equipment with ease.

Here’s a guide to replacing and adjusting the O-rings:

  1. Identify the O-Rings:   Each EVNO microphone requires two O-rings for its suspension system.
  2. Remove Old O-Rings:   Carefully remove the old O-rings from the suspension ring and the plastic holder. This can usually be done by gently cutting them off if they are not broken or simply removing them from the ring and top plastic of the microphone head.
  3. Prepare New O-Rings:
    Obtain replacement O-rings from the EVNO store. A standard size is available for all models.
  4. Attach New O-Rings:
    Place the new O-rings around the suspension ring and secure them into the plastic holder.
    Make sure the O-rings are seated properly to provide the necessary tension and stability.
  5. Suspension Ring Adjustment:
    The suspension ring has seven points where you can position the microphone head. This allows for customization of the microphone’s placement within the suspension ring.
    To adjust the head placement, simply choose the desired point on the suspension ring and attach the microphone head accordingly.
  6. Balancing and Stability:
    Ensure that the microphone head is balanced and stable within the suspension ring. Proper adjustment helps to isolate the microphone from vibrations and handling noise.

 

 
$5.00
$9.00
A1 Transmitter 900MHz ADD ON
A1 Transmitter 900MHz ADD ON

Add a discounted extra transmitter when purchased with a complete system.

A1 Transmitter 900MHz ADD ON
SALE 54% OFF

Evno wireless systems can receive microphone signals from a variety of Evno transmitters, each designed for specific purposes. These transmitters sync with the Air, W1-True Diversity, and W2-Dual Receiver systems. Depending on location and other wireless devices in the area, a combination of 5-6 systems can be used simultaneously.


A1 Transmitter
    •    A1 / A1E - Clip-on Belt Pack-free:
    ◦    Description: The A1 is a standard transmitter that allows for belt pack-free wireless operation. It clips onto the body of an Evno microphone, and its 3-pin mini XLR connector plugs into the female end on the microphone body.
    ◦    Power: Powered by one AA battery, offering approximately 13-14 hours of continuous use.
    ◦    Features: Includes a mute button.
    ◦    A1E: - 823-832MHz for regions outside of the USA and Canada.
$100.00
$219.00

FIND YOUR ANSWERS HERE

FREQUENTLY ASKED QUESTIONS

Can I use the microphone wireless?

All Evno microphone packages are designed to be compatible with wireless setups. While each package includes specific components tailored to the chosen setup, the microphone itself is versatile and can be seamlessly integrated with any configuration, including wireless.

Can I use my Evno microphone with other brands of wireless?

Yes, EVNO microphones are designed to be versatile and compatible with various other popular wireless systems, including those from Shure, Sennheiser, AKG, and McCormick. To ensure seamless integration, you will need the correct adapter cable for each brand.

What is the best EVNO wireless setup?

When selecting the best wireless setup from EVNO Microphone Systems, it's essential to consider your specific needs and performance requirements. EVNO offers three distinct wireless options, each catering to different scenarios while maintaining top-notch sound quality across the board. 

W1 - True Diversity

W2 - Dual Wireless

Air - Perfect travel size and quick and easy setups.

 

Please see our education page for more information.

What Is Phantom power?

Phantom power is direct current (DC) electric power that is applied equally to both signal wires of a balanced microphone cable. Phantom power supplies are most often built into mixing consoles and microphone preamps. The purpose of Phantom power is to supply 48 volts of current to microphones that have built-in active circuitry over the same cable that is used to send the microphone’s signal back to the mixer or preamp. Since there is no visible power supply unit (like those common with tube microphones) the term Phantom power is used.

Do you offer a belt pack style transmitter with a volume control?

Yes, Evno offers the A2 belt pack transmitter for musicians who prefer an on-body transmitter. The A2 includes a convenient volume control, allowing players to adjust their sound levels effortlessly.

Do you have a hand held wireless microphone?

Yes, Evno offers the AH handheld microphone which sync’s to the W1, W2, and Air receivers.  The most common setup would be to combine the AH with W2 Dual receiver to have both a wireless horn microphone and hand held active at the same time.

Where do I order an Evno Microphone?

Evno Microphones are available at our growing number of dealers. The dealer can assist you with your buying needs. See current dealers page for more information.  If a dealer does not have stock, you can order directly on our website.  For a list of distributors and dealers outside of the USA, please also see the dealers page.
See All FAQs

Can't find an answer to your question?

Call or txt message us at 973-975-9917 or use our contact form to send an email.

Email address*

Your question*