Evno O-Rings (Bag of 6)

Replacement O-Rings for Evno Microphones

EVNO Microphones are equipped with O-rings that are part of the suspension system, providing stability and isolation for the microphone capsule. Replacing and adjusting the O-rings on your EVNO microphone is a quick and straightforward process that can be done without tools. Regular maintenance of the suspension system ensures the microphone performs optimally and remains stable during use. O-rings take years to deteriorate.  If you live and perform near salt water the breakdown of the O-ring can be quicker.  Replacement O-rings are readily available in the EVNO store, allowing you to maintain the high standards of your equipment with ease.

Here’s a guide to replacing and adjusting the O-rings:

1. Identify the O-Rings:   Each EVNO microphone requires two O-rings for its suspension system.
2. Remove Old O-Rings:   Carefully remove the old O-rings from the suspension ring and the plastic holder. This can usually be done by gently cutting them off if they are not broken or simply removing them from the ring and top plastic of the microphone head.
3. Prepare New O-Rings:
   Obtain replacement O-rings from the EVNO store. A standard size is available for all models.
4. Attach New O-Rings:
   Place the new O-rings around the suspension ring and secure them into the plastic holder.
   Make sure the O-rings are seated properly to provide the necessary tension and stability.
5. Suspension Ring Adjustment:
   The suspension ring has seven points where you can position the microphone head. This allows for customization of the microphone’s placement within the suspension ring.
   To adjust the head placement, simply choose the desired point on the suspension ring and attach the microphone head accordingly.
6. Balancing and Stability:
   Ensure that the microphone head is balanced and stable within the suspension ring. Proper adjustment helps to isolate the microphone from vibrations and handling noise.