EVNO Cables: EVNO Microphones are designed to be versatile and compatible with a range of wireless systems through the use of specific cables. It is crucial to use the correct cables to ensure optimal performance and to avoid damaging the microphone capsule. Below is a detailed guide to the different cables available for connecting EVNO microphones to various systems:

• Standard Cable: EVNO TA4

  • Connectors: 3-pin mini XLR (microphone side) to 4-pin mini XLR
    Uses: 
  • Connects EVNO microphones to the PS95 preamp/power supply.
  • Connects EVNO microphones to Shure wireless belt packs.
  • Connects EVNO microphones to EVNO A2 wireless belt packs.
    
    Important Note: This is the standard cable and substitutes should not be used as they could damage the microphone capsule.

• Optional Cable: EVNO TA4-11 (11in Jumper Cable)

  • Connectors: 3-pin mini XLR (microphone side) to 4-pin mini XLR
    Uses: 
  • 11 Inch cable to connect Evno microphones to Evno A2 and Shure wireless beltpack transmitters attached to the horn.
  • Connects EVNO microphones to the PS95 preamp/power supply.

• XLR Cable: EVNO XLR-10

  • Standard XLR (Not Mini xlr) Cable.
  • 10 Foot XLR
    Uses: 
  • Standard XLR uses
  • Used with PS95 to connect to mixing console.
  • Used with W1 and W2 receiver outputs to connect to mixing console.

• EVNO 3.5

  
  
  • Connectors: 3-pin mini XLR (microphone side) to 1/8in locking connector.
    Uses: 
  • Connects EVNO microphones to Sennheiser wireless systems with 1/8-inch (3.5mm) locking connectors.

• EVNO 3.5 (TBX & TPX)

  
  
  • Connectors: 3-pin mini XLR (microphone side) to 1/8in locking connector.
    Uses: 
  • Connects EVNO TBX & TPX microphones to Sennheiser wireless systems with 1/8-inch (3.5mm) locking connectors.

• EVNO TA3

  • Connectors: 3-pin mini XLR (microphone side) to 3-pin mini XLR connector.
    Uses: 
  • Connects EVNO microphones to AKG and McCormick wireless belt pack systems.

• EVNO Air TS Cable

  • Standard 1/4in TS mono jumper cable connects Air, W1, and W2 receivers to D.I. boxes.