Evno TPX2-W2 Dual Wireless Trumpet Microphone (Complete Wireless System)
Evno TPX2-W2 Dual Wireless Trumpet Microphone (Complete Wireless System)
Evno TPX2-W2 Dual Wireless Trumpet Microphone (Complete Wireless System)
Evno TPX2-W2 Dual Wireless Trumpet Microphone (Complete Wireless System)
Evno TPX2-W2 Dual Wireless Trumpet Microphone (Complete Wireless System)
Evno TPX2-W2 Dual Wireless Trumpet Microphone (Complete Wireless System)
Evno TPX2-W2 Dual Wireless Trumpet Microphone (Complete Wireless System)
Evno TPX2-W2 Dual Wireless Trumpet Microphone (Complete Wireless System)

Evno TPX2-W2 Dual Wireless Trumpet Microphone (Complete Wireless System)

Designed for Trumpet and Flugelhorn with OFF and ON Bell Mounting

$999.00
Save $0.00

The Evno TPX2-W2 is a dual mountable bell and off the bell complete wireless system for trumpet and flugelhorn, designed for superior performance and reliability. It features a Dual receiver antenna system, providing the ability to use two microphones and two transmitters from the Evno Wireless product line. The package contains everything needed in a complete wireless package and for the player looking to mount a microphone to both the bell and off the bell as needed.

 

The TPX2 offers a 6.5” gooseneck.  The microphone is designed to produce the most natural reproduction of sound possible while allowing for the most gain before feedback. The microphone attaches to the lead pipe with TPX-CL clamp. The clamp holds the extension rod which extends the microphone to the bell.  Remove the extension bar and TPX-CL clamp and the microphone can be mounted to the bell with an additional Evno Swivel clamp. The microphone will allow you to be heard as you sound without coloration giving the audience a true representation of the sound the player works a lifetime to develop. 


The Evno W2 dual wireless operates two separate antennas, one for each side of the receiver / microphone / transmitter. The W2 is housed in a metal chassis with 2-XLR and 1-1/4in output which mirrors side in the case where you need a 1/4in output.   A 1/2 rack-mountable design, the system come with a rack-kit and extension cables to place in a standard rack unit.  The extension kit places the antennas on the front of the of the rack case allowing quick removal of the antennas for storage. The antennas disconnect with an BNC locking connector to either the back or front when racked.  

 

Powered by an included power supply is easy to setup. The available 99 channels are changed with with a sync’ing process that sends the signal from the receiver to the transmitters with IR.  Easy to change quickly on stage. Use of 5-6 systems simultaneously allows for horn style bands of all types to use an Evno belt-pack free wireless system.  The W2 can also be used along side the Air and W1 systems and are not only compatible with both but also compatible with the A2, AH, and A4 transmitters. *Dependent on region and availability.

 

The W2 system is available in the 900-928MHz range for the United States, Brazil, Canada, and other free frequency regions.  **see chart below for more information.

 

The W2 system is shipped with a rack-kit, antennas,  power supply, extension cables, and the A1 transmitter to combine with an Evno microphone. The system in combination with an Evno microphone produces the most natural reproduction of an acoustic instrument on the market. For dual operation, a 2nd transmitter and microphone must be selected and purchased as desired and needed.  

 

The Evno W2 Dual Wireless System offers a complete package for musicians seeking a rack mountable, high-quality dual wireless solution for their Evno Microphone. The system includes all necessary components to ensure a seamless and reliable performance experience. 


The complete Evno TPX2-W2 setup includes the Evno TPX2 microphone, Evno TPX-CL Clamp, W2 Dual wireless receiver, A1 transmitter, power supply and rack kit.

  • Complete Wireless System

    Includes TPX2 Bell Mounted Microphone and W2 True Diversity Wireless System

  • Wireless Compatible

    Evno, Shure, Sennhieser,

    Akg, McCormick (Cables sold separately) Add PS95 for hard-wired setups

  • OFF and On Bell Mounted

    Comes with TPX2-CL for off the bell mounting

  • Trumpet and Flugelhorn

    1st choice recommendation
Quantity

  • Main Features

  • Description

  • Specs 

  • Included

  • Setup and Configuration

  • Frequency by

    Region

    •    Dual Receiver: This receiver can handle signals from two separate transmitters simultaneously, providing the ability to use two microphones at the same time.
    •    Range: Offers a maximum distance of approximately 100 meters, making it suitable for large venues and stages.
    •    Metal Chassis: Durable and robust design with a 2-XLR and 1-1/4 inch output.
    •    Rack-Mountable: 1/2 rack-mountable design with a rack-kit and extension cables for standard rack unit placement. Antennas can be positioned on the front of the rack case for easy access and removal.

Description

The Evno W2 is a dual wireless system specifically designed to accommodate two Evno microphones active at the same time.  This allows for the player to use any combination of Evno microphones wireless at the same.  A flute, clarinet, or saxophone etc, can both be active to use at the same time depending on what your particular needs maybe.  Independent (2) XLR outputs offer separate control of each microphone / transmitter for greater control of EQ  and volume over each channel.  The W2 offers a Diversity antenna system which provides a distance at about 100meters. 

 
The Evno W2 dual wireless operates two separate antennas, one for each side of the receiver / microphone / transmitter. The W2 is housed in a metal chassis with 2-XLR and 1-1/4in output which mirrors side in the case where you need a 1/4in output.   A 1/2 rack-mountable design, the system come with a rack-kit and extension cables to place in a standard rack unit.  The extension kit places the antennas on the front of the of the rack case allowing quick removal of the antennas for storage. The antennas disconnect with an BNC locking connector to either the back or front when racked.  
Powered by an included power supply is easy to setup. The available 99 channels are changed with with a sync’ing process that sends the signal from the receiver to the transmitters with IR.  Easy to change quickly on stage. Use of 5-6 systems simultaneously allows for horn style bands of all types to use an Evno belt-pack free wireless system.  The W2 can also be used along side the Air and W1 systems and are not only compatible with both but also compatible with the A2, AH, and A4 transmitters. *Dependent on region and availability.


The W2 system is available in the 900-928MHz range for the United States, Brazil, Canada, and other free frequency regions.  **see chart below for more information.


The W2 system is shipped with a rack-kit, antennas,  power supply, extension cables, and the A1 transmitter to combine with an Evno microphone. The system in combination with an Evno microphone produces the most natural reproduction of an acoustic instrument on the market. For dual operation, a 2nd transmitter and microphone must be selected and purchased as desired and needed.  
The Evno W2 Dual Wireless System offers a complete package for musicians seeking a rack mountable, high-quality dual wireless solution for their Evno Microphone. The system includes all necessary components to ensure a seamless and reliable performance experience. 

Receiver:
    •    Frequency Range: 902-928 MHz, 823-832 MHz
    •    Receive Sensitivity: -110 dBm (sinad ≥30 dB)
    •    Signal/Noise Ratio: >105 dB
    •    Power Supply: DC 12V / 500 mA
    •    Audio Output: 1-XLR, 1-1/4 inch
    •    Antenna: Diversity, Detachable, Dual

Transmitter:
    •    Frequency Range: 902-928 MHz
    •    RF Power: 10 mW
    •    Microphone Type: Condenser
    •    Directivity: Cardioid
    •    Deviation: ±48 KHz
    •    Antenna: 1/4 wave length wire type
    •    Battery Voltage: 1.5V (1x1.5V AA Battery)
    •    Power Consumption: 14 hours, battery-dependent

System Specifications:
    •    Frequency Range: 902-928 MHz
    •    Modulation Mode: FM
    •    Dynamic Range: >100 dB
    •    Frequency Response: 60 Hz - 17 KHz ± 3 dB
    •    Total Harmonic Distortion: <0.5% at 1 KHz
    •    Signal/Noise Ratio: ≥108 dB
    •    Distance: Up to 500 feet / 150 m
 

Package Contents
    •    Microphone
    •    Evno W2 Dual Wireless System: Complete dual wireless system.
    •    Rack-Kit: For easy integration into standard rack units.
    •    Antennas: Includes detachable antennas with BNC locking connectors.
    •    Power Supply: 12V power supply included.
    •    Extension Cables: For flexible antenna placement in the front of a rack kit.
    •    A1 Transmitter: Compatible with Evno microphones, ensuring natural reproduction of acoustic instruments in a clip-on, belt pack-less design. 

Setup and Configuration
    •    Power Supply: Includes a 12V power supply for easy setup.
    •    Channel Selection: Features 99 available channels that can be quickly changed using an IR sync process, allowing for rapid adjustments on stage.
    •    Compatibility: Can be used with up to 5-6 systems simultaneously, making it ideal for horn style bands. Compatible with other Evno systems (Air, W2) and transmitters (A2, AH, A4), depending on region and availability.
    •    Frequency Ranges:
    ◦    900-928 MHz: For the United States, Brazil, Canada, and other free frequency regions. *See additional information for all regions including South America.

902-928MHz Countries of operation:

Australia (915-928MHz)
Brazil (902-907, 915-927.75MHz)
Canada
Columbia
Costa Rica
Dominican Republic
Ecuador
Guyana
Hong Kong (923-925MHz)
Indonesia (923-925MHz)
Mexico
New Zealand (915-928Mhz)
Paraguay
Peru
Puerto Rico
South Korea (925-928)
Venezuela
United States of America

Craftsmanship and Features

Evno W2 Dual Receiver

The Evno W2 is a dual wireless system specifically designed to accommodate two Evno microphones active at the same time.  This allows for the player to use any combination of Evno microphones wireless at the same.  A flute, clarinet, or saxophone etc, can both be active to use at the same time depending on what your particular needs maybe.  Independent (2) XLR outputs offer separate control of each microphone / transmitter for greater control of EQ  and volume over each channel.  The W2 offers a Diversity antenna system which provides a distance at about 100meters. 

Evno A1 Transmitter

Beltpack free transmitter clips to an Evno Microphone.

W2 Receiver Back Panel

Made in the USA

All parts are made by hand and assembled in the USA!

Additional Recomendations

EVNO FEATURED ACCESSORIES

PS95 & Ta4 Cable
PS95 & Ta4 Cable

Extra Windscreen / Replacement

 

PS95 & Ta4 Cable

PS95 & Ta4 cable work with all Evno microphone to use the microphone hardwired.
$140.00
$179.00
Windscreen - Large

Extra Windscreen / Replacement

 

Windscreen - Large

Evno windscreens are available in two sizes, tailored to fit the two different sizes of capsule shells. These windscreens are included with each microphone but use is optional designed to protect the microphone diaphragm from gusts of air, which can occur in windy conditions. They are particularly beneficial for more aggressive players who produce higher volume levels, as the resulting wind stream can be on occasion be noticed. The windscreens help enhance sound by reducing breath noise. Conversely, for softer players, the breath noise produced on certain instruments may be a deliberate part of their sound, making the use of a windscreen less desirable.


Evno windscreens come in two sizes to accommodate different microphone capsule shells:


WS-LG - Large Size Windscreens

Compatible with the following models:
    •    SX
    •    TPX
    •    TBX
    •    TPX1
    •    TPX2
    •    CLX upper
    •    PN1
    •    PN2
    •    ABX
    •    VBX
    •    SPX2 upper
$15.00
$19.00
Ta4 Cable - Evno to Shure & PS95 Power/Preamp

Extra Ta4 Cable / Replacement

Ta4 Cable - Evno to Shure & PS95 Power/Preamp

EVNO Microphones are designed to be versatile and compatible with a range of wireless systems through the use of specific cables. It is crucial to use the correct cables to ensure optimal performance and to avoid damaging the microphone capsule. 


Evno Microphone Systems makes it possible to use a wireless system from other major brands. Shure, Sennheiser, AKG, and McCormick are all compatible with an Evno microphone. Note: These options operate with a traditional belt pack style transmitter and only an Evno Wireless system offers the belt pack free option. 


The optional OR replacement cable is setup for the customer that already owns a wireless system from one of these brands. The Ta4 is also compatible with the PS95 Preamp / power supply for hard wired use.  

  • Standard Cable: EVNO TA4
    • Connectors: 3-pin mini XLR (microphone side) to 4-pin mini XLR
      Uses: 
    • Connects EVNO microphones to the PS95 preamp/power supply.
    • Connects EVNO microphones to Shure wireless belt packs.
    • Connects EVNO microphones to EVNO A2 wireless belt packs.

      Important Note: This is the standard cable and substitutes should not be used as they could damage the microphone capsule.
$49.00
$79.00
Evno TPX2-CL (Trumpet Clamp Mounted Off the Bell)

Add an extra clamp for quick switches between horns. (TPT & Flugelhorn)

Evno TPX2-CL (Trumpet Clamp Mounted Off the Bell)

Design: Hand Made In the USA from anodized aluminum. The clamp is for off the bell mounting.

Instruments: Trumpet and flugelhorn.

Features: Secure lead pipe mounting with a thumb screw for extension rod adjustment. The microphone attaches to the rod.

Systems: Standard with TPX2 Trumpet microphone system.
$79.00
$99.00
Evno O-Rings (Bag of 6)

Replacement O-rings.

Evno O-Rings (Bag of 6)

Replacement O-Rings for Evno Microphones

EVNO Microphones are equipped with O-rings that are part of the suspension system, providing stability and isolation for the microphone capsule. Replacing and adjusting the O-rings on your EVNO microphone is a quick and straightforward process that can be done without tools. Regular maintenance of the suspension system ensures the microphone performs optimally and remains stable during use. O-rings take years to deteriorate.  If you live and perform near salt water the breakdown of the O-ring can be quicker.  Replacement O-rings are readily available in the EVNO store, allowing you to maintain the high standards of your equipment with ease.

Here’s a guide to replacing and adjusting the O-rings:

  1. Identify the O-Rings:   Each EVNO microphone requires two O-rings for its suspension system.
  2. Remove Old O-Rings:   Carefully remove the old O-rings from the suspension ring and the plastic holder. This can usually be done by gently cutting them off if they are not broken or simply removing them from the ring and top plastic of the microphone head.
  3. Prepare New O-Rings:
    Obtain replacement O-rings from the EVNO store. A standard size is available for all models.
  4. Attach New O-Rings:
    Place the new O-rings around the suspension ring and secure them into the plastic holder.
    Make sure the O-rings are seated properly to provide the necessary tension and stability.
  5. Suspension Ring Adjustment:
    The suspension ring has seven points where you can position the microphone head. This allows for customization of the microphone’s placement within the suspension ring.
    To adjust the head placement, simply choose the desired point on the suspension ring and attach the microphone head accordingly.
  6. Balancing and Stability:
    Ensure that the microphone head is balanced and stable within the suspension ring. Proper adjustment helps to isolate the microphone from vibrations and handling noise.

 

 
$5.00
$9.00
A1 Transmitter 900MHz ADD ON
A1 Transmitter 900MHz ADD ON
A1 Transmitter 900MHz ADD ON

Add a discounted extra transmitter when purchased with a complete system.

A1 Transmitter 900MHz ADD ON
SALE 54% OFF

Evno wireless systems can receive microphone signals from a variety of Evno transmitters, each designed for specific purposes. These transmitters sync with the Air, W1-True Diversity, and W2-Dual Receiver systems. Depending on location and other wireless devices in the area, a combination of 5-6 systems can be used simultaneously.


A1 Transmitter
    •    A1 / A1E - Clip-on Belt Pack-free:
    ◦    Description: The A1 is a standard transmitter that allows for belt pack-free wireless operation. It clips onto the body of an Evno microphone, and its 3-pin mini XLR connector plugs into the female end on the microphone body.
    ◦    Power: Powered by one AA battery, offering approximately 13-14 hours of continuous use.
    ◦    Features: Includes a mute button.
    ◦    A1E: - 823-832MHz for regions outside of the USA and Canada.
$100.00
$219.00

FIND YOUR ANSWERS HERE

FREQUENTLY ASKED QUESTIONS

Can I use the microphone wireless?

All Evno microphone packages are designed to be compatible with wireless setups. While each package includes specific components tailored to the chosen setup, the microphone itself is versatile and can be seamlessly integrated with any configuration, including wireless.

Can I use my Evno microphone with other brands of wireless?

Yes, EVNO microphones are designed to be versatile and compatible with various other popular wireless systems, including those from Shure, Sennheiser, AKG, and McCormick. To ensure seamless integration, you will need the correct adapter cable for each brand.

What is the best EVNO wireless setup?

When selecting the best wireless setup from EVNO Microphone Systems, it's essential to consider your specific needs and performance requirements. EVNO offers three distinct wireless options, each catering to different scenarios while maintaining top-notch sound quality across the board. 

W1 - True Diversity

W2 - Dual Wireless

Air - Perfect travel size and quick and easy setups.

 

Please see our education page for more information.

What Is Phantom power?

Phantom power is direct current (DC) electric power that is applied equally to both signal wires of a balanced microphone cable. Phantom power supplies are most often built into mixing consoles and microphone preamps. The purpose of Phantom power is to supply 48 volts of current to microphones that have built-in active circuitry over the same cable that is used to send the microphone’s signal back to the mixer or preamp. Since there is no visible power supply unit (like those common with tube microphones) the term Phantom power is used.

Do you offer a belt pack style transmitter with a volume control?

Yes, Evno offers the A2 belt pack transmitter for musicians who prefer an on-body transmitter. The A2 includes a convenient volume control, allowing players to adjust their sound levels effortlessly.

Do you have a hand held wireless microphone?

Yes, Evno offers the AH handheld microphone which sync’s to the W1, W2, and Air receivers.  The most common setup would be to combine the AH with W2 Dual receiver to have both a wireless horn microphone and hand held active at the same time.

Where do I order an Evno Microphone?

Evno Microphones are available at our growing number of dealers. The dealer can assist you with your buying needs. See current dealers page for more information.  If a dealer does not have stock, you can order directly on our website.  For a list of distributors and dealers outside of the USA, please also see the dealers page.
See All FAQs

Can't find an answer to your question?

Call or txt message us at 973-975-9917 or use our contact form to send an email.

Email address*

Your question*