Evno SPX2 Soprano Microphone (Double Mic Wired System)

Designed specific for Soprano Saxophone - Single Microphone

$679.00
$849.00
Save $170.00

The EVNO SPX2 double soprano saxophone microphone system is designed and manufactured by hand in the USA. The microphone is designed specifically for soprano saxophone. A bell mounted setup designed to produce the most natural reproduction of sound possible while allowing for the most gain before feedback.  The double microphone design has a predetermined mix allowing the frequencies over the bell to be greater than the bell to achieve the most natural sound of the instrument as possible.  The SPX2 double microphone design includes two elements tuned specifically for soprano and suited to address all the problems that are common in mic’ing a soprano saxophone.  The microphone will allow you to be heard as you sound without coloration, giving the audience a true representation and the most detail of the sound the player works a lifetime to develop. 

The SPX2 is the perfect choice from solo performance settings, principal soloist’s in all genres, to high energy horn section bands of all styles.  The system can be used in low to high volume applications without the worry of saturating the element due to volume or high end feedback from surrounding instruments.  The double microphone setup captures all the nuances and subtleties possible from pro level players. The SPX2 is the ideal choice for soprano players playing not only as a principal soloist but saxophone sections alike.  The newly designed clamp allows for perfect placement on the bell of the soprano by putting the upper head of the microphone at the perfect point above the keys and the lower microphone in front of the bell.  The gooseneck allows movement away from the bell as needed to accommodate fingers and key movement.  The microphone is easy to clamp on and take off the bell with a spring loaded clamp while always being attached at the perfect height. The clamp is attached to the instrument with a loaded spring but also includes a reinforcement screw if your movement on stage is extreme. With the reinforcement screw not active, the setup can be moved quickly from one horn to another.  The SXCL clamp also allow the player to use the same clamp with the Evno SX tenor, alto, and baritone saxophone microphone as needed with the SX tenor, alto and Bari microphone.  The SPX2 stay flex gooseneck, designed in the USA, holds position as desired while being lightweight in design.  The microphone itself is built with perfect venting as well as a highly attractive machining process creating a beautiful look while allowing the frequencies of the instrument to fully be captured by the microphone itself.  Suspended in a standard variable 7 point ring, the microphone allows for simple and easy replacements of the O rings as needed.  The microphone body is terminated with a 3 pin mini XLR connection which is used for both wired and wireless connections.  

The microphone system can be used wired or wirelessly.  The Evno SPX2 is shipped with the PS95 power supply for wired use while still being adaptable and ready to use with Evno, Shure, AKG, or Sennheiser wireless systems.    (AKG and Sennheiser cables ordered separately to mate the microphone with another brand wireless or available in a package with the microphone and cable for customers who already own an Evno, AKG, Shure, or Sennheiser system.) The included cable with the SPX1 model works both with the Evno PS95 phantom power adapter, and Shure wireless transmitters.  By-pass the cable to connect to Envo clip-on wireless transmitters. Additional packages include the SPX2 system with Evno Wireless or the SPX2 microphone setup directly for use with Shure, AKG, or Sennheiser wireless systems.

The complete Evno SPX2 setup includes an Evno PS95 power supply / preamp, Evno SXCL Clamp, SPX2 Microphone, cable and a cable.  XLR cables to connect from the PS95 power supply to a mixing console not included. A standard XLR / Mic cable is required.

  • Optional Wireless

    Includes Ta3 cable for AKG Wireless.  Add optional cables for compatible with PS95 and Evno A2 Transmitters

  • Compatibility

    At any time add the PS95 for wired use or an Evno Wireless System for beltpack free wireless

  • Bell Mounted

    Includes the SX-CL Clamp

  • Soprano Saxophone Double Microphone

    1st choice recommendation

Quantity
  • Main Features

  • Description

  • Specs 

  • Included

Evno SPX2 Double Soprano Saxophone Microphone System
≈ Designed specific for Soprano saxophone
≈ Captures all nuances of the instrument
≈ Lightweight aluminum clamp includes reinforcement tightening screw 
≈ Most natural sounding instrument microphone on the market
≈ Include SXCL Clamp
≈ Ideal for soloist and horn sections including large ensembles of all styles
≈ 5.5” and 4” Flex-stay Gooseneck holds position as desired
≈ Compatible with Evno, Shure, Sennheiser, AKG, & McCormick Wireless
≈ Powered by PS95 for hardwired connection or wireless transmitters
≈ Includes carrying case
≈ Modular system breaks down for ease of transport
≈ Compatible with Evno, Shure, AKG, and Sennheiser wireless.

Description

The EVNO SPX2 double soprano saxophone microphone system is designed and manufactured by hand in the USA. The microphone is designed specifically for soprano saxophone. A bell mounted setup designed to produce the most natural reproduction of sound possible while allowing for the most gain before feedback.  The double microphone design has a predetermined mix allowing the frequencies over the bell to be greater than the bell to achieve the most natural sound of the instrument as possible.  The SPX2 double microphone design includes two elements tuned specifically for soprano and suited to address all the problems that are common in mic’ing a soprano saxophone.  The microphone will allow you to be heard as you sound without coloration, giving the audience a true representation and the most detail of the sound the player works a lifetime to develop.

 

The SPX2 is the perfect choice from solo performance settings, principal soloist’s in all genres, to high energy horn section bands of all styles.  The system can be used in low to high volume applications without the worry of saturating the element due to volume or high end feedback from surrounding instruments.  The double microphone setup captures all the nuances and subtleties possible from pro level players. The SPX2 is the ideal choice for soprano players playing not only as a principal soloist but saxophone sections alike.  The newly designed clamp allows for perfect placement on the bell of the soprano by putting the upper head of the microphone at the perfect point above the keys and the lower microphone in front of the bell.  The gooseneck allows movement away from the bell as needed to accommodate fingers and key movement.  The microphone is easy to clamp on and take off the bell with a spring loaded clamp while always being attached at the perfect height. The clamp is attached to the instrument with a loaded spring but also includes a reinforcement screw if your movement on stage is extreme. With the reinforcement screw not active, the setup can be moved quickly from one horn to another.  The SXCL clamp also allow the player to use the same clamp with the Evno SX tenor, alto, and baritone saxophone microphone as needed with the SX tenor, alto and Bari microphone.  The SPX2 stay flex gooseneck, designed in the USA, holds position as desired while being lightweight in design.  The microphone itself is built with perfect venting as well as a highly attractive machining process creating a beautiful look while allowing the frequencies of the instrument to fully be captured by the microphone itself.  Suspended in a standard variable 7 point ring, the microphone allows for simple and easy replacements of the O rings as needed.  The microphone body is terminated with a 3 pin mini XLR connection which is used for both wired and wireless connections.  

 

The microphone system can be used wired or wirelessly.  The Evno SPX2 is shipped with the PS95 power supply for wired use while still being adaptable and ready to use with Evno, Shure, AKG, or Sennheiser wireless systems.    (AKG and Sennheiser cables ordered separately to mate the microphone with another brand wireless or available in a package with the microphone and cable for customers who already own an Evno, AKG, Shure, or Sennheiser system.) The included cable with the SPX1 model works both with the Evno PS95 phantom power adapter, and Shure wireless transmitters.  By-pass the cable to connect to Envo clip-on wireless transmitters. Additional packages include the SPX2 system with Evno Wireless or the SPX2 microphone setup directly for use with Shure, AKG, or Sennheiser wireless systems.

 

The complete Envo SPX2 setup includes an Evno PS95 power supply / preamp, Evno SXCL Clamp, SPX2 Microphone, cable and a cable.  XLR cables to connect from the PS95 power supply to a mixing console not included. A standard XLR / Mic cable is required.

Frequency Response

Polar Pattern

The complete Evno SPX2 setup includes: 

  • Evno PS95 power supply / preamp
  • Evno SXCL Clamp
  • SPX2 Double Microphone
  • Case
  • Cable (Ta4) Connects microphone to PS96 Preamp or Shure Wireless
  • Windscreen (lg & sm)

**XLR cables to connect from the PS95 power supply to a mixing console not included. A standard XLR / Mic cable is required for hardwired connections.

Craftsmanship and Features

 SX-CL Clamp

Lightweight aluminum clamp allows for quick instrument changes, includes reinforcement tightening screw 

Flex-Stay Gooseneck 
(Made in USA)

5.5” Flex-stay Gooseneck holds position as desired

Powered by PS95 Preamp/power supply

Powered by the PS95 with phantom power or (1) AA Battery. When used wireless, the Evno A1 powers the microphone or other brand transmitters

Made in the USA

All parts are made by hand and assembled in the USA!

FIND YOUR ANSWERS HERE

FREQUENTLY ASKED QUESTIONS

Can I use the microphone wireless?

All Evno microphone packages are designed to be compatible with wireless setups. While each package includes specific components tailored to the chosen setup, the microphone itself is versatile and can be seamlessly integrated with any configuration, including wireless.

Can I use my Evno microphone with other brands of wireless?

Yes, EVNO microphones are designed to be versatile and compatible with various other popular wireless systems, including those from Shure, Sennheiser, AKG, and McCormick. To ensure seamless integration, you will need the correct adapter cable for each brand.

What is the best EVNO wireless setup?

When selecting the best wireless setup from EVNO Microphone Systems, it's essential to consider your specific needs and performance requirements. EVNO offers three distinct wireless options, each catering to different scenarios while maintaining top-notch sound quality across the board. 

W1 - True Diversity

W2 - Dual Wireless

Air - Perfect travel size and quick and easy setups.

 

Please see our education page for more information.

What Is Phantom power?

Phantom power is direct current (DC) electric power that is applied equally to both signal wires of a balanced microphone cable. Phantom power supplies are most often built into mixing consoles and microphone preamps. The purpose of Phantom power is to supply 48 volts of current to microphones that have built-in active circuitry over the same cable that is used to send the microphone’s signal back to the mixer or preamp. Since there is no visible power supply unit (like those common with tube microphones) the term Phantom power is used.

Do you offer a belt pack style transmitter with a volume control?

Yes, Evno offers the A2 belt pack transmitter for musicians who prefer an on-body transmitter. The A2 includes a convenient volume control, allowing players to adjust their sound levels effortlessly.

Do you have a hand held wireless microphone?

Yes, Evno offers the AH handheld microphone which sync’s to the W1, W2, and Air receivers.  The most common setup would be to combine the AH with W2 Dual receiver to have both a wireless horn microphone and hand held active at the same time.

Where do I order an Evno Microphone?

Evno Microphones are available at our growing number of dealers. The dealer can assist you with your buying needs. See current dealers page for more information.  If a dealer does not have stock, you can order directly on our website.  For a list of distributors and dealers outside of the USA, please also see the dealers page.

See All FAQs

Can't find an answer to your question?

Call or txt message us at 973-975-9917 or use our contact form to send an email.

Email address*

Your question*

SX Recomendations

EVNO FEATURED ACCESSORIES