Evno SPX1-W2 Dual Wireless Soprano Saxophone Microphone (Complete Wireless System)

Designed specific for Soprano Saxophone - Single Microphone - Dual wireless operation

$959.00
$1,199.00
Save $240.00

The EVNO SPX1-W2 Wireless Soprano Microphone system is meticulously handcrafted in the USA to provide the most natural reproduction of sound. A single microphone over the key design allow for the most gain possible in a wireless setup. The SPX1-W2 package includes the SPX1 microphone with the EVNO W2 Dual wireless system capable of using two microphones / transmitters active at the same time.


The microphone is designed specifically for soprano saxophone. A bell mounted single setup designed to produce the most gain before feedback.  The single microphone design is geared to be light weight in design while allowing the most crucial area of the instrument to be reproduced in a single microphone design.  The SPX1 microphone design is tuned specifically for soprano and suited to address all the problems that are common in mic’ing a soprano saxophone.


The SPX1 is the perfect choice for higher volume settings for solo performance, principal soloist’s in all genres, to high energy horn section bands of all styles.  The system can be used in low to high volume applications without the worry of saturating the element due to volume or high end feedback from surrounding instruments.  The SPX1 is the ideal choice for soprano players also playing in a section and who may also want to use on alto, tenor, or Bari as well. Removing the microphone from its extension shaft and re-positioning the microphone body on to an alto, tenor, or bari bell is possible.   


The gooseneck allows movement away from the bell as needed to accommodate fingers and key movement.  The microphone is easy to clamp on and take off the bell with a spring loaded clamp while always being attached at the perfect height. The clamp is attached to the instrument with a loaded spring but also includes a reinforcement screw if your movement on stage is extreme.  The SXCL clamp also allow the player to use the same clamp with the Evno SX tenor, alto, and baritone saxophone microphone as needed with the SX tenor, alto and Bari microphone.  The SPX1 Stay-Flex gooseneck, designed in the USA, holds position as desired while being lightweight in design.  The microphone itself is built with perfect venting as well as a highly attractive machining process creating a beautiful look while allowing the frequencies of the instrument to fully be captured by the microphone itself.  Suspended in a standard variable 7 point suspension ring, the microphone allows for simple and easy replacements of the O rings as needed.  The microphone body is terminated with a 3 pin mini XLR connection which is used for both wired and wireless connections.  


The Evno W2 is a dual wireless system specifically designed to accommodate two Evno microphones active at the same time.  This allows for the player to use any combination of Evno microphones wireless at the same.  A flute, clarinet, or saxophone etc, can both be active to use at the same time depending on what your particular needs maybe.  Independent (2) XLR outputs offer separate control of each microphone / transmitter for greater control of EQ  and volume over each channel.  The W2 offers a Diversity antenna system which provides a distance at about 100meters.  

 

The Evno W2 dual wireless operates two separate antennas, one for each side of the receiver / microphone / transmitter. The W2 is housed in a metal chassis with 2-XLR and 1-1/4in output which mirrors side in the case where you need a 1/4in output.   A 1/2 rack-mountable design, the system come with a rack-kit and extension cables to place in a standard rack unit.  The extension kit places the antennas on the front of the of the rack case allowing quick removal of the antennas for storage. The antennas disconnect with an BNC locking connector to either the back or front when racked.  

 

Powered by an included power supply is easy to setup. The available 99 channels are changed with with a sync’ing process that sends the signal from the receiver to the transmitters with IR.  Easy to change quickly on stage. Use of 5-6 systems simultaneously allows for horn style bands of all types to use an Evno belt-pack free wireless system.  The W2 can also be used along side the Air and W1 systems and are not only compatible with both but also compatible with the A2, AH, and A4 transmitters. *Dependent on region and availability.

 

The W2 system is available in the 900-928MHz range for the United States, Brazil, Canada, and other free frequency regions.  **see chart below for more information.

 

The W2 system is shipped with a rack-kit, antennas,  power supply, extension cables, and the A1 transmitter to combine with an Evno microphone. The system in combination with an Evno microphone produces the most natural reproduction of an acoustic instrument on the market. For dual operation, a 2nd transmitter and microphone must be selected and purchased as desired and needed.  

 

The Evno W2 Dual Wireless System offers a complete package for musicians seeking a rack mountable, high-quality dual wireless solution for their Evno Microphone. The system includes all necessary components to ensure a seamless and reliable performance experience. 


The complete Evno SPX1-W2 setup includes the Evno SPX1 microphone, Evno SXCL Clamp, W2 Dual wireless receiver, A1 transmitter, power supply and rack kit. 

  • Complete Wireless System

    Includes SPX2 Double Soprano Microphone and W2 Dual Diversity Wireless System. Add second mic/transmitter to dual receiver at any time.

  • Compatibility

    At any time add the PS95 for wired use or an Evno Wireless System for beltpack free wireless

  • Bell Mounted

    Includes the SX-CL Clamp

  • Soprano Saxophone Single Microphone

    Most gain before feedback in a single mic design.

Quantity
Buy now with ShopPay
  • Main Features

  • Description

  • SPX1 Description

  • Specs 

  • Included

  • Setup and Configuration

  • Frequency by

    Region

    •    Dual Receiver: This receiver can handle signals from two separate transmitters simultaneously, providing the ability to use two microphones at the same time.
    •    Range: Offers a maximum distance of approximately 100 meters, making it suitable for large venues and stages.
    •    Metal Chassis: Durable and robust design with a 2-XLR and 1-1/4 inch output.
    •    Rack-Mountable: 1/2 rack-mountable design with a rack-kit and extension cables for standard rack unit placement. Antennas can be positioned on the front of the rack case for easy access and removal.

Description

The Evno W2 is a dual wireless system specifically designed to accommodate two Evno microphones active at the same time.  This allows for the player to use any combination of Evno microphones wireless at the same.  A flute, clarinet, or saxophone etc, can both be active to use at the same time depending on what your particular needs maybe.  Independent (2) XLR outputs offer separate control of each microphone / transmitter for greater control of EQ  and volume over each channel.  The W2 offers a Diversity antenna system which provides a distance at about 100meters. 

 
The Evno W2 dual wireless operates two separate antennas, one for each side of the receiver / microphone / transmitter. The W2 is housed in a metal chassis with 2-XLR and 1-1/4in output which mirrors side in the case where you need a 1/4in output.   A 1/2 rack-mountable design, the system come with a rack-kit and extension cables to place in a standard rack unit.  The extension kit places the antennas on the front of the of the rack case allowing quick removal of the antennas for storage. The antennas disconnect with an BNC locking connector to either the back or front when racked.  
Powered by an included power supply is easy to setup. The available 99 channels are changed with with a sync’ing process that sends the signal from the receiver to the transmitters with IR.  Easy to change quickly on stage. Use of 5-6 systems simultaneously allows for horn style bands of all types to use an Evno belt-pack free wireless system.  The W2 can also be used along side the Air and W1 systems and are not only compatible with both but also compatible with the A2, AH, and A4 transmitters. *Dependent on region and availability.


The W2 system is available in the 900-928MHz range for the United States, Brazil, Canada, and other free frequency regions.  **see chart below for more information.


The W2 system is shipped with a rack-kit, antennas,  power supply, extension cables, and the A1 transmitter to combine with an Evno microphone. The system in combination with an Evno microphone produces the most natural reproduction of an acoustic instrument on the market. For dual operation, a 2nd transmitter and microphone must be selected and purchased as desired and needed.  
The Evno W2 Dual Wireless System offers a complete package for musicians seeking a rack mountable, high-quality dual wireless solution for their Evno Microphone. The system includes all necessary components to ensure a seamless and reliable performance experience. 

The EVNO SPX1 soprano saxophone microphone system is designed and manufactured by hand in the USA. The microphone is designed specifically for soprano saxophone. A bell mounted single setup designed to produce the most gain before feedback.  The single microphone design is geared to be light weight in design while allowing the most crucial area of the instrument to be reproduced in a single microphone design.  The SPX1 microphone design is tuned specifically for soprano and suited to address all the problems that are common in mic’ing a soprano saxophone.

 

The SPX1 is the perfect choice for higher volume settings for solo performance, principal soloist’s in all genres, to high energy horn section bands of all styles.  The system can be used in low to high volume applications without the worry of saturating the element due to volume or high end feedback from surrounding instruments.  The SPX1 is the ideal choice for soprano players also playing in a section and who may also want to use on alto, tenor, or Bari as well. Removing the microphone from its extension shaft and re-positioning the microphone body on to an alto, tenor, or bari bell is possible.   

 

The newly designed clamp allows for perfect placement on the bell of the soprano by putting the upper head of the microphone at the perfect point above the keys and the lower microphone in front of the bell.  The gooseneck allows movement away from the bell as needed to accommodate fingers and key movement.  The microphone is easy to clamp on and take off the bell with a spring loaded clamp while always being attached at the perfect height. The clamp is attached to the instrument with a loaded spring but also includes a reinforcement screw if your movement on stage is extreme.  The SXCL clamp also allow the player to use the same clamp with the Evno SX tenor, alto, and baritone saxophone microphone as needed with the SX tenor, alto and Bari microphone.  The SPX1 Stay-Flex gooseneck, designed in the USA, holds position as desired while being lightweight in design.  The microphone itself is built with perfect venting as well as a highly attractive machining process creating a beautiful look while allowing the frequencies of the instrument to fully be captured by the microphone itself.  Suspended in a standard variable 7 point suspension ring, the microphone allows for simple and easy replacements of the O rings as needed.  The microphone body is terminated with a 3 pin mini XLR connection which is used for both wired and wireless connections.  

Receiver:
    •    Frequency Range: 902-928 MHz, 823-832 MHz
    •    Receive Sensitivity: -110 dBm (sinad ≥30 dB)
    •    Signal/Noise Ratio: >105 dB
    •    Power Supply: DC 12V / 500 mA
    •    Audio Output: 1-XLR, 1-1/4 inch
    •    Antenna: Diversity, Detachable, Dual

Transmitter:
    •    Frequency Range: 902-928 MHz
    •    RF Power: 10 mW
    •    Microphone Type: Condenser
    •    Directivity: Cardioid
    •    Deviation: ±48 KHz
    •    Antenna: 1/4 wave length wire type
    •    Battery Voltage: 1.5V (1x1.5V AA Battery)
    •    Power Consumption: 14 hours, battery-dependent

System Specifications:
    •    Frequency Range: 902-928 MHz
    •    Modulation Mode: FM
    •    Dynamic Range: >100 dB
    •    Frequency Response: 60 Hz - 17 KHz ± 3 dB
    •    Total Harmonic Distortion: <0.5% at 1 KHz
    •    Signal/Noise Ratio: ≥108 dB
    •    Distance: Up to 500 feet / 150 m
 

Package Contents
    •    Microphone
    •    Evno W2 Dual Wireless System: Complete dual wireless system.
    •    Rack-Kit: For easy integration into standard rack units.
    •    Antennas: Includes detachable antennas with BNC locking connectors.
    •    Power Supply: 12V power supply included.
    •    Extension Cables: For flexible antenna placement in the front of a rack kit.
    •    A1 Transmitter: Compatible with Evno microphones, ensuring natural reproduction of acoustic instruments in a clip-on, belt pack-less design. 

Setup and Configuration
    •    Power Supply: Includes a 12V power supply for easy setup.
    •    Channel Selection: Features 99 available channels that can be quickly changed using an IR sync process, allowing for rapid adjustments on stage.
    •    Compatibility: Can be used with up to 5-6 systems simultaneously, making it ideal for horn style bands. Compatible with other Evno systems (Air, W2) and transmitters (A2, AH, A4), depending on region and availability.
    •    Frequency Ranges:
    ◦    900-928 MHz: For the United States, Brazil, Canada, and other free frequency regions. *See additional information for all regions including South America.

902-928MHz Countries of operation:

Australia (915-928MHz)
Brazil (902-907, 915-927.75MHz)
Canada
Columbia
Costa Rica
Dominican Republic
Ecuador
Guyana
Hong Kong (923-925MHz)
Indonesia (923-925MHz)
Mexico
New Zealand (915-928Mhz)
Paraguay
Peru
Puerto Rico
South Korea (925-928)
Venezuela
United States of America

Craftsmanship and Features

Evno W2 Dual Receiver

The Evno W2 is a dual wireless system specifically designed to accommodate two Evno microphones active at the same time.  This allows for the player to use any combination of Evno microphones wireless at the same.  A flute, clarinet, or saxophone etc, can both be active to use at the same time depending on what your particular needs maybe.  Independent (2) XLR outputs offer separate control of each microphone / transmitter for greater control of EQ  and volume over each channel.  The W2 offers a Diversity antenna system which provides a distance at about 100meters. 

Evno A1 Transmitter

Beltpack free transmitter clips to an Evno Microphone.

W2 Receiver Back Panel

Made in the USA

All parts are made by hand and assembled in the USA!

Additional Recomendations

EVNO FEATURED ACCESSORIES

FIND YOUR ANSWERS HERE

FREQUENTLY ASKED QUESTIONS

Can I use the microphone wireless?

All Evno microphone packages are designed to be compatible with wireless setups. While each package includes specific components tailored to the chosen setup, the microphone itself is versatile and can be seamlessly integrated with any configuration, including wireless.

Can I use my Evno microphone with other brands of wireless?

Yes, EVNO microphones are designed to be versatile and compatible with various other popular wireless systems, including those from Shure, Sennheiser, AKG, and McCormick. To ensure seamless integration, you will need the correct adapter cable for each brand.

What is the best EVNO wireless setup?

When selecting the best wireless setup from EVNO Microphone Systems, it's essential to consider your specific needs and performance requirements. EVNO offers three distinct wireless options, each catering to different scenarios while maintaining top-notch sound quality across the board. 

W1 - True Diversity

W2 - Dual Wireless

Air - Perfect travel size and quick and easy setups.

 

Please see our education page for more information.

What Is Phantom power?

Phantom power is direct current (DC) electric power that is applied equally to both signal wires of a balanced microphone cable. Phantom power supplies are most often built into mixing consoles and microphone preamps. The purpose of Phantom power is to supply 48 volts of current to microphones that have built-in active circuitry over the same cable that is used to send the microphone’s signal back to the mixer or preamp. Since there is no visible power supply unit (like those common with tube microphones) the term Phantom power is used.

Do you offer a belt pack style transmitter with a volume control?

Yes, Evno offers the A2 belt pack transmitter for musicians who prefer an on-body transmitter. The A2 includes a convenient volume control, allowing players to adjust their sound levels effortlessly.

Do you have a hand held wireless microphone?

Yes, Evno offers the AH handheld microphone which sync’s to the W1, W2, and Air receivers.  The most common setup would be to combine the AH with W2 Dual receiver to have both a wireless horn microphone and hand held active at the same time.

Where do I order an Evno Microphone?

Evno Microphones are available at our growing number of dealers. The dealer can assist you with your buying needs. See current dealers page for more information.  If a dealer does not have stock, you can order directly on our website.  For a list of distributors and dealers outside of the USA, please also see the dealers page.

See All FAQs

Can't find an answer to your question?

Call or txt message us at 973-975-9917 or use our contact form to send an email.

Email address*

Your question*