BSX1 (Wired Single Mic System)
BSX1 (Wired Single Mic System)
BSX1 (Wired Single Mic System)
BSX1 (Wired Single Mic System)

BSX1 (Wired Single Mic System)

Designed specific for Bassoon - Single Microphone

$599.00
$749.00
Save $150.00

The EVNO BSX1 Bassoon microphone system is designed and manufactured by hand in the USA. The microphone is designed specifically for bassoon to produce the most natural reproduction of sound possible while allowing for the most gain before feedback.  The microphone will allow you to be heard as you sound without coloration giving the audience a true representation of the sound the player works a lifetime to develop. This one mic setup is simple to use allowing for adjustment over the bell joint.  It allows for both hardwired and wireless application to accommodate a variety of performance situations.  

The BSX1 is the perfect choice from solo performance settings, principal soloist’s in all genres, to the marching band fields.  The system can be used in low to high volume applications without the worry of low end feedback from surrounding instruments.  

The BSX-CL clamp allows for perfect placement around the bell bell joint of the bassoon putting the head of the microphone at the perfect axis point without any spin or twist to off set the microphone from the instrument. It is easy to clamp on and take off the bell joint with a tightening thumb screw style clamp while always being attached at the desired height with a padded velcro strap. The clamp also allows the player to attach to the boot joint as well if desired. (Optional model: BSX2 offers a double microphone setup for mounting to both the boot and bell joints.)  The BSX1 gooseneck, designed in the USA, holds position as desired while being lightweight in design.  The microphone itself is built with perfect venting as well as a highly attractive machining process creating a beautiful look while allowing the frequencies of the instrument to fully be captured by the microphone itself.  Suspended in a standard microphone suspension of variable 7 points, the microphone allows for simple and easy replacements of the O rings as needed.  The microphone body is terminated with a 3 pin mini XLR connection which is used for both wired and wireless connections.  

The microphone system can be used wired or wirelessly.  The EVNO BSX1 is shipped with the PS95 power supply for wired use while still being adaptable and ready to use with EVNO, Shure, AKG, or Sennheiser wireless systems.  (AKG and Sennheiser cables ordered separately to mate the microphone with another brand wireless or available in a package with the microphone and cable for customers who already own an Evno, AKG, Shure, or Sennheiser system.) The included cable with the BSX1 model works both with the Evno PS95 phantom power adapter, and Shure wireless transmitters.  By-pass the cable to connect to Evno clip-on wireless transmitters creating a completely wire free setup.  Additional packages include the BSX1 system with EVNO Wireless or the BSX1 microphone setup directly for use with Shure, AKG, or Sennheiser wireless systems.

The complete Evno BSX1 setup includes the Evno PS95 power supply / preamp, Evno BSX-CL Clamp, BSX1 5.5”in microphone, case, and a cable.  XLR cables to connect from the PS95 power supply to a mixing console not included. A standard XLR / Mic cable is required for hardwired connections.

  • Hardwired setup

    Powered by PS95 Preamp

  • Wireless Compatible

    Evno, Shure, Sennhieser,

    Akg, McCormick (Cables sold separately) 

  • Strap Mounted on instrument

    Optional microphone stand mounting

  • Bassoon

    Single Mic setup for quick and easy mounting
Quantity

  • Main Features

  • Description

  • Specs 

  • Included

Evno BSX1 Bassoon Microphone System
≈ Designed specific for Bassoon in single mic easy setup
≈ Use as a one mic setup over the top of the instrument
≈ Compatible with Evno W1, AIR, or W2 Dual for a belt pack free wireless system
≈ Complete with PS95 power supply for wired use
≈ 5.5” Flex-stay Gooseneck holds position
≈ Clamps mount around instrument allowing mic body and gooseneck to adjust to different heights
≈ Compatible with Evno, Shure, Sennheiser, AKG, & McCormick Wireless
≈ Powered by PS95 for hardwired connection or wireless transmitters
≈ Includes Evno plastic carrying case

Description

The EVNO BSX1 Bassoon microphone system is designed and manufactured by hand in the USA. The microphone is designed specifically for bassoon to produce the most natural reproduction of sound possible while allowing for the most gain before feedback.  The microphone will allow you to be heard as you sound without coloration giving the audience a true representation of the sound the player works a lifetime to develop. This one mic setup is simple to use allowing for adjustment over the bell joint.  It allows for both hardwired and wireless application to accommodate a variety of performance situations.  

 

The BSX1 is the perfect choice from solo performance settings, principal soloist’s in all genres, to the marching band fields.  The system can be used in low to high volume applications without the worry of low end feedback from surrounding instruments.  

 

The BSX-CL clamp allows for perfect placement around the bell bell joint of the bassoon putting the head of the microphone at the perfect axis point without any spin or twist to off set the microphone from the instrument. It is easy to clamp on and take off the bell joint with a tightening thumb screw style clamp while always being attached at the desired height with a padded velcro strap. The clamp also allows the player to attach to the boot joint as well if desired. (Optional model: BSX2 offers a double microphone setup for mounting to both the boot and bell joints.)  The BSX1 gooseneck, designed in the USA, holds position as desired while being lightweight in design.  The microphone itself is built with perfect venting as well as a highly attractive machining process creating a beautiful look while allowing the frequencies of the instrument to fully be captured by the microphone itself.  Suspended in a standard microphone suspension of variable 7 points, the microphone allows for simple and easy replacements of the O rings as needed.  The microphone body is terminated with a 3 pin mini XLR connection which is used for both wired and wireless connections.  

 

The microphone system can be used wired or wirelessly.  The EVNO BSX1 is shipped with the PS95 power supply for wired use while still being adaptable and ready to use with EVNO, Shure, AKG, or Sennheiser wireless systems.  (AKG and Sennheiser cables ordered separately to mate the microphone with another brand wireless or available in a package with the microphone and cable for customers who already own an Evno, AKG, Shure, or Sennheiser system.) The included cable with the BSX1 model works both with the Evno PS95 phantom power adapter, and Shure wireless transmitters.  By-pass the cable to connect to Evno clip-on wireless transmitters creating a completely wire free setup.  Additional packages include the BSX1 system with EVNO Wireless or the BSX1 microphone setup directly for use with Shure, AKG, or Sennheiser wireless systems.

The complete Evno BSX1 setup includes the Evno PS95 power supply / preamp, Evno BSX-CL Clamp, BSX1 5.5”in microphone, case, and a cable.  XLR cables to connect from the PS95 power supply to a mixing console not included. A standard XLR / Mic cable is required for hardwired connections.

Frequency Response

Polar Pattern

The complete Evno BSX1 setup includes: 

  • Evno PS95 power supply / preamp
  • Evno BSX-CL Clamp
  • BSX Microphone 
  • Case
  • Cable (Ta4) Connects microphone to PS96 Preamp or Shure Wireless

**XLR cables to connect from the PS95 power supply to a mixing console not included. A standard XLR / Mic cable is required for hardwired connections.

Craftsmanship and Features

Multi Position

The BSX2 clamps to the side of the bassoon allowing the goosenecks to be position over the most crucial areas of the instrument as needed. 

Powered by PS95 Preamp/power supply

Powered by the PS95 with phantom power or (1) AA Battery. When used wireless, the Evno A1 powers the microphone or other brand transmitters

Made in the USA

All parts are made by hand and assembled in the USA!

Additional Recomendations

EVNO FEATURED ACCESSORIES

Evno ST-CL (Traditional Microphone Stand Mounting)
Evno ST-CL (Traditional Microphone Stand Mounting)

Mount an Evno to a traditional mic stand

Evno ST-CL (Traditional Microphone Stand Mounting)

    •    Design: For traditional microphone stand attachment. The Evno ST-CL is intended to mount Envo instrument microphones to a traditional microphone stand. The Clamp attaches to a standard threaded microphone stand which then allows an Evno microphone to be attached to the clamp.
    •    Instruments: Various, including saxophone, acoustic bass, acoustic guitar, trumpet, and trombone.
    •    Features: Attaches to standard threaded microphone stands, allowing Evno microphones to be mounted and positioned using either the body or gooseneck attachment depending on the reach required.
    •    Systems: Ideal for players in orchestras, big bands, or pit settings where space is limited and a clip-on system is not required.

Notes: Various placement options allow a nice alternative in home studio use which allows the player to close mic an instrument where traditional large diaphragm microphones may be limited due to space or availability.
$59.00
Windscreen - Large

Extra Windscreen / Replacement

 

Windscreen - Large

Evno windscreens are available in two sizes, tailored to fit the two different sizes of capsule shells. These windscreens are included with each microphone but use is optional designed to protect the microphone diaphragm from gusts of air, which can occur in windy conditions. They are particularly beneficial for more aggressive players who produce higher volume levels, as the resulting wind stream can be on occasion be noticed. The windscreens help enhance sound by reducing breath noise. Conversely, for softer players, the breath noise produced on certain instruments may be a deliberate part of their sound, making the use of a windscreen less desirable.


Evno windscreens come in two sizes to accommodate different microphone capsule shells:


WS-LG - Large Size Windscreens

Compatible with the following models:
    •    SX
    •    TPX
    •    TBX
    •    TPX1
    •    TPX2
    •    CLX upper
    •    PN1
    •    PN2
    •    ABX
    •    VBX
    •    SPX2 upper
$15.00
$19.00
Ta4 Cable - Evno to Shure & PS95 Power/Preamp

Extra Ta4 Cable / Replacement

Ta4 Cable - Evno to Shure & PS95 Power/Preamp

EVNO Microphones are designed to be versatile and compatible with a range of wireless systems through the use of specific cables. It is crucial to use the correct cables to ensure optimal performance and to avoid damaging the microphone capsule. 


Evno Microphone Systems makes it possible to use a wireless system from other major brands. Shure, Sennheiser, AKG, and McCormick are all compatible with an Evno microphone. Note: These options operate with a traditional belt pack style transmitter and only an Evno Wireless system offers the belt pack free option. 


The optional OR replacement cable is setup for the customer that already owns a wireless system from one of these brands. The Ta4 is also compatible with the PS95 Preamp / power supply for hard wired use.  

  • Standard Cable: EVNO TA4
    • Connectors: 3-pin mini XLR (microphone side) to 4-pin mini XLR
      Uses: 
    • Connects EVNO microphones to the PS95 preamp/power supply.
    • Connects EVNO microphones to Shure wireless belt packs.
    • Connects EVNO microphones to EVNO A2 wireless belt packs.

      Important Note: This is the standard cable and substitutes should not be used as they could damage the microphone capsule.
$49.00
$79.00
W1 - TRUE DIVERSITY

Add the W1 Wireless System to the package for both wired and wireless capabilities.

W1 - TRUE DIVERSITY

The Evno W1 is the flag-ship wireless setup in the Evno wireless line.  The W1 offers a True Diversity antenna system which provides the greatest distance at about 150meters.  The Evno W1 True Diversity operates two antennas and two receivers at the same time while combining the audio.  The antenna system switches the audio between antenna A and B depending on which antenna signal is stronger at the position on the stage.  A True Diversity system is more stable and advanced as it also offers greater range as apposed to a diversity system with a single or double antenna.


The W1 is housed in a metal chassis with 1-XLR and 1-1/4in output. A 1/2 rack-mountable design, the system come with a rack-kit and extension cables to place in a standard rack unit.  The extension kit places the antennas on the front of the of the rack case allowing quick removal of the antennas for storage. The antennas disconnect with an BNC locking connector to either the back or front when racked.  
Powered by an included 12V power supply is easy to setup. The available 99 channels are changed with with a sync’ing process that sends the signal from the receiver to the transmitters with IR.  Easy to change quickly on stage. Use of 5-6 systems simultaneously allows for horn style bands of all types to use an Evno belt-pack free wireless system.  The W1 can also be used along side the Air and W2 systems and are not only compatible with both but also compatible with the A2, AH, and A4 transmitters. *Dependent on region and availability.


The W1 system is available in the 900-928MHz range for the United States, Brazil, Canada, and other free frequency regions while the 823-832Mhz range is setup for most territories in Europe. **see chart below for more information.
The W1 system is shipped with a rack-kit, antennas, 12V power supply, extension cables, and the A1 transmitter to combine with an Evno microphone. The system in combination with an Evno microphone produces the most natural reproduction of an acoustic instrument on the market. 
$499.00
$699.00
Evno Air - Travel Size

Add the Air Wireless System to the package for both wired and wireless capabilities.

Evno Air - Travel Size

The Evno Air is compact yet powerful professional wireless system, perfect for travel. Complete with 1/4 inch output ideal for microphone inputs and D.I. boxes. The Air system is ideal for quick setups and travel while maintaining a high sonic quality in combination with an Evno designed microphone. Using the same technology as the W1 and W2 systems the Air is Evno’s compact version. Folding antennas and a small footprint allow for portability in a compact setup. Powered by a provided 9V power supply the system also offers a battery option for power. Using 2 (AA) batteries in the receiver powers the system for 4 hours of continuous use in situations where the power is not available making it possible to use the system in remote locations as needed.

The Air system is available in the 900-928MHz range for the United States, Brazil, Canada, and other free frequency regions while the 823-832Mhz range is setup for most territories in Europe. **see chart below for more information. The Air is a 99 channel system, the channels are changed via a sync process that sends the channel change from the receiver to the transmitter and can be changed in seconds as needed. Compatible with A1, A2, AH, and A4 transmitters *dependent on region and availability.


The Air system is shipped with an aluminum carrying case for protection however is small enough to pack in a horn case or carry-on for ease of travel. The system in combination with an Evno microphone produces the most natural reproduction of an acoustic instrument on the market.
$459.00
$579.00
W2 - Dual Wireless

Add the W2 Wireless System to the package for both wired and wireless capabilities.

W2 - Dual Wireless

The Evno W2 is a dual wireless system specifically designed to accommodate two Evno microphones active at the same time. This allows for the player to use any combination of Evno microphones wireless at the same. A flute, clarinet, or saxophone etc, can both be active to use at the same time depending on what your particular needs maybe. Independent (2) XLR outputs offer separate control of each microphone / transmitter for greater control of EQ and volume over each channel. The W2 offers a Diversity antenna system which provides a distance at about 100meters.

The Evno W2 dual wireless operates two separate antennas, one for each side of the receiver / microphone / transmitter. The W2 is housed in a metal chassis with 2-XLR and 1-1/4in output which mirrors side in the case where you need a 1/4in output. A 1/2 rack-mountable design, the system come with a rack-kit and extension cables to place in a standard rack unit. The extension kit places the antennas on the front of the of the rack case allowing quick removal of the antennas for storage. The antennas disconnect with an BNC locking connector to either the back or front when racked.

Powered by an included power supply is easy to setup. The available 99 channels are changed with with a sync’ing process that sends the signal from the receiver to the transmitters with IR. Easy to change quickly on stage. Use of 5-6 systems simultaneously allows for horn style bands of all types to use an Evno belt-pack free wireless system. The W2 can also be used along side the Air and W1 systems and are not only compatible with both but also compatible with the A2, AH, and A4 transmitters. *Dependent on region and availability.

The W2 system is available in the 900-928MHz range for the United States, Brazil, Canada, and other free frequency regions. **see chart below for more information.

The W2 system is shipped with a rack-kit, antennas, power supply, extension cables, and the A1 transmitter to combine with an Evno microphone. The system in combination with an Evno microphone produces the most natural reproduction of an acoustic instrument on the market. For dual operation, a 2nd transmitter and microphone must be selected and purchased as desired and needed.

EVNO W2 components:

Dual receiver

Rack mount kit

2 BNC antennas

Power supply

User guide

EVNO A1 wireless clip-on instrument microphone transmitter

902-928MHz Countries of operation:

Australia (915-928MHz)

Brazil (902-907, 915-927.75MHz)

Canada

Columbia

Costa Rica

Dominican Republic

Ecuador

Guyana

Hong Kong (923-925MHz)

Indonesia (923-925MHz)

Mexico

New Zealand (915-928Mhz)

Paraguay

Peru

Puerto Rico

South Korea (925-928)

Venezuela

United States of America

RECEIVER:

Frequency Range: 902-928MHz

Receive Sensitivity: -110dBm (sinad ≥30dB)

Signal/Noise Ratio: >105dB

Power Supply: DC12V/ 500mA

Audio Output: 1-XLR, 1- 1/4in

Antenna: Diversity, Detachable

TRANSMITTER:

Frequency Range: 902-928MHz

RF Power: 10mW

Microphone Type: Condenser

Directivity：Cardioid

Deviation: ±48KHz

Antenna: 1/4 wave Length wire type

Battery Voltage: 1.5V (1x1.5V AA Battery)

Power Consumption: 14 hours, battery-dependent

SYSTEM SPECIFICATION:

Comprehensive Performance

Frequency Range: 902-928MHz

Modulation Mode: FM

Dynamic Range: >100dB

Frequency Response: 60Hz-17KHz±3dB

Total Harmonic Distortion: <0.5% at 1KHz

Signal/Noise Ratio: ≥108dB

Distance: Up to 500 feet / 150 m
$549.00
$689.00

FIND YOUR ANSWERS HERE

FREQUENTLY ASKED QUESTIONS

Can I use the microphone wireless?

All Evno microphone packages are designed to be compatible with wireless setups. While each package includes specific components tailored to the chosen setup, the microphone itself is versatile and can be seamlessly integrated with any configuration, including wireless.

Can I use my Evno microphone with other brands of wireless?

Yes, EVNO microphones are designed to be versatile and compatible with various other popular wireless systems, including those from Shure, Sennheiser, AKG, and McCormick. To ensure seamless integration, you will need the correct adapter cable for each brand.

What is the best EVNO wireless setup?

When selecting the best wireless setup from EVNO Microphone Systems, it's essential to consider your specific needs and performance requirements. EVNO offers three distinct wireless options, each catering to different scenarios while maintaining top-notch sound quality across the board. 

W1 - True Diversity

W2 - Dual Wireless

Air - Perfect travel size and quick and easy setups.

 

Please see our education page for more information.

What Is Phantom power?

Phantom power is direct current (DC) electric power that is applied equally to both signal wires of a balanced microphone cable. Phantom power supplies are most often built into mixing consoles and microphone preamps. The purpose of Phantom power is to supply 48 volts of current to microphones that have built-in active circuitry over the same cable that is used to send the microphone’s signal back to the mixer or preamp. Since there is no visible power supply unit (like those common with tube microphones) the term Phantom power is used.

Do you offer a belt pack style transmitter with a volume control?

Yes, Evno offers the A2 belt pack transmitter for musicians who prefer an on-body transmitter. The A2 includes a convenient volume control, allowing players to adjust their sound levels effortlessly.

Do you have a hand held wireless microphone?

Yes, Evno offers the AH handheld microphone which sync’s to the W1, W2, and Air receivers.  The most common setup would be to combine the AH with W2 Dual receiver to have both a wireless horn microphone and hand held active at the same time.

Where do I order an Evno Microphone?

Evno Microphones are available at our growing number of dealers. The dealer can assist you with your buying needs. See current dealers page for more information.  If a dealer does not have stock, you can order directly on our website.  For a list of distributors and dealers outside of the USA, please also see the dealers page.
See All FAQs

Can't find an answer to your question?

Call or txt message us at 973-975-9917 or use our contact form to send an email.

Email address*

Your question*