CLX-Air (Komplettes Drahtlossystem)

Designed specific for Clarinet & Oboe

$839.00
$1,049.00
Save $210.00

The EVNO CLX-Air is a compact complete wireless clarinet microphone system is designed and manufactured by hand in the USA. The microphone is designed specifically for clarinet and oboe. A bell mounted setup designed to produce the most natural reproduction of sound possible while allowing for the most gain before feedback.  The double microphone design has a predetermined mix allowing the frequencies over the bell to be greater than the bell to achieve the most natural sound of the instrument as possible. The CLX-Air system includes the CLX Microphone with the complete Air Wireless system.

Compact yet powerful professional wireless system, perfect for travel. Complete with 1/4 inch output ideal for microphone inputs and D.I. boxes.  The Air system is ideal for quick setups and travel while maintaining a high sonic quality in combination with an Evno designed microphone.  Using the same technology as the W1 and W2 systems the Air is Evno’s compact version.  Folding antennas and a small footprint allow for portability in a compact setup.  Powered by a provided 9V power supply the system also offers a battery option for power.  Using 2 (AA) batteries in the receiver powers the system for 4 hours of continuous use in situations where the power is not available making it possible to use the system in remote locations as needed.  


The Air system is available in the 900-928MHz range for the United States, Brazil, Canada, and other free frequency regions while the 823-832Mhz range is setup for most territories in Europe. **see chart below for more information. 

 The Air is a 99 channel system, the channels are changed via a sync process that sends the channel change from the receiver to the transmitter and can be changed in seconds as needed.  Compatible with A1, A2, AH, and A4 transmitters *dependent on region and availability. 

The Air system is shipped with an aluminum carrying case for protection however is small enough to pack in a horn case or carry-on for ease of travel.  The system in combination with an Evno microphone produces the most natural reproduction of an acoustic instrument on the market. 

The CLX is the perfect choice from solo performance settings, principal soloist’s in all genres, to high energy horn section bands of all styles.  From orchestral musicians to jazz, folk, klezmer, polka, and marching band the CLX will give you a setup where all the nuances of the instrument can be heard.  Each genre and player has a different sound and by keeping the microphone flatly EQ’d, you’ll sound like YOU sound without coloration.  The system can be used in low to high volume applications without the worry of saturating the element due to volume or high end feedback from surrounding instruments.  The CLX is the ideal choice for clarinet and oboe players playing not only as a principal soloist but in sections alike. Clarinet quartets, trios, and marching band sections alike are able to use the microphone wired or wireless as desired. The Evno designed clamp allows for perfect placement above the bell of the clarinet by putting the upper head of the microphone at the perfect point above the keys and the lower microphone in front of the bell.  

The gooseneck allows movement away from the body of the instrument and the bell as needed to accommodate fingers and key movement.  The microphone is easy to place on and take off the instrument with a screw tightening clamp while always being attached at the perfect height. The gooseneck in from the bell allows movement to place on an instrument stand.  The CLX gooseneck, designed in the USA, holds position as desired while being lightweight in design.  The microphone itself is built with perfect venting as well as a highly attractive machining process creating a beautiful look while allowing the frequencies of the instrument to fully be captured by the microphone itself.  Suspended in two standard variable 7 point suspensions, the microphone allows for simple and easy replacements of the O rings as needed.  The microphone body is terminated with a 3 pin mini XLR connection which is used for both wired and wireless connections.  

The microphone system can be used wired or wirelessly.  The Evno CLX adaptable and ready to use with Evno, Shure, AKG, or Sennheiser wireless systems.    (AKG and Sennheiser cables ordered separately to mate the microphone with another brand wireless or available in a package with the microphone and cable for customers who already own an Evno, AKG, Shure, or Sennheiser system.)

The complete Evno CLX-Air setup includes an Evno Air Wireless System, Evno CLX Microphone with built in clamp, case, and cable.

  • Complete Wireless System

    Comes with Air Wireless System

  • Wireless / Hardwired Compatible

    Evno, Shure, Sennhieser,

    Akg, McCormick (Cables sold separately) Convert to hardwired with PS95 Preamp

  • Clamps onto instrument

    Intergrated clamping systems with microphone

  • Clarinet and Oboe

    Double microphone design captures all the nuances of the instrument

Titel
Quantity
  • Main Features

  • CLX Description

  • Air Description

  • Specs 

  • Included

  • Setup and Configuration

  • Frequency by

    Region

Evno Air Wireless System
≈ Compact size receiver for easy travel
≈ Aluminum case with foam packing included
≈ Receiver powered with included 9V power supply or 2 - AA batteries
≈ Perfect for pedal board mounting or next to you on stage
≈ UHF with 100 selectable channels - region dependent
≈ 1/4in (6.3mm) output
≈ Diversity antenna system with two built in antennas
≈ 80-meter (262ft) Range
≈ IR Sync from receiver for quick channel changes
≈ Air and A1 transmitter compatible with W1 and W2 receivers (region dependent)
≈ Compatible with A1, A2, A4, & AH transmitters
≈ LCD Display shows frequency, audio, and RF signals

The EVNO CLX clarinet microphone system is designed and manufactured by hand in the USA. The microphone is designed specifically for clarinet and oboe. A bell mounted setup designed to produce the most natural reproduction of sound possible while allowing for the most gain before feedback.  The double microphone design has a predetermined mix allowing the frequencies over the bell to be greater than the bell to achieve the most natural sound of the instrument as possible.  Similar to the SPX2 the CLX has many of the same characteristics however varies in several ways to accurately accommodate the clarinet.  The CLX double microphone design includes two elements tuned specifically for clarinet and oboe and suited to address all the problems that are common in mic’ing a lower volume instrument.  The microphone will allow you to be heard as you sound without coloration, giving the audience a true representation of the sound the player works a lifetime to develop.

 

The CLX is the perfect choice from solo performance settings, principal soloist’s in all genres, to high energy horn section bands of all styles.  From orchestral musicians to jazz, folk, klezmer, polka, and marching band the CLX will give you a setup where all the nuances of the instrument can be heard.  Each genre and player has a different sound and by keeping the microphone flatly EQ’d, you’ll sound like YOU sound without coloration.  The system can be used in low to high volume applications without the worry of saturating the element due to volume or high end feedback from surrounding instruments.  The CLX is the ideal choice for clarinet and oboe players playing not only as a principal soloist but in sections alike. Clarinet quartets, trios, and marching band sections alike are able to use the microphone wired or wireless as desired. The Evno designed clamp allows for perfect placement above the bell of the clarinet by putting the upper head of the microphone at the perfect point above the keys and the lower microphone in front of the bell.  

 

The gooseneck allows movement away from the body of the instrument and the bell as needed to accommodate fingers and key movement.  The microphone is easy to place on and take off the instrument with a screw tightening clamp while always being attached at the perfect height. The gooseneck in from the bell allows movement to place on an instrument stand.  The CLX gooseneck, designed in the USA, holds position as desired while being lightweight in design.  The microphone itself is built with perfect venting as well as a highly attractive machining process creating a beautiful look while allowing the frequencies of the instrument to fully be captured by the microphone itself.  Suspended in two standard variable 7 point suspensions, the microphone allows for simple and easy replacements of the O rings as needed.  The microphone body is terminated with a 3 pin mini XLR connection which is used for both wired and wireless connections. 

 

The microphone system can be used wired or wirelessly.  The Evno CLX is shipped with the PS95 power supply for wired use while still being adaptable and ready to use with Evno, Shure, AKG, or Sennheiser wireless systems.    (AKG and Sennheiser cables ordered separately to mate the microphone with another brand wireless or available in a package with the microphone and cable for customers who already own an Evno, AKG, Shure, or Sennheiser system.) The included cable with the CLX system works both with the Evno PS95 phantom power adapter, and Shure wireless transmitters.  By-pass the cable to connect to Evno clip-on wireless transmitters. Additional packages include the CLX system with Evno Wireless or the CLX microphone setup directly for use with Shure, AKG, or Sennheiser wireless systems.

Description

The Evno Air is a compact yet powerful professional wireless system, perfect for travel. Complete with 1/4 inch output ideal for microphone inputs and D.I. boxes.  The Air system is ideal for quick setups and travel while maintaining a high sonic quality in combination with an Evno designed microphone.  Using the same technology as the W1 and W2 systems the Air is Evno’s compact version.  Folding antennas and a small footprint allow for portability in a compact setup.  Powered by a provided 9V power supply the system also offers a battery option for power.  Using 2 (AA) batteries in the receiver powers the system for 4 hours of continuous use in situations where the power is not available making it possible to use the system in remote locations as needed.  


The Air system is available in the 900-928MHz range for the United States, Brazil, Canada, and other free frequency regions.

 

The Air is a 99 channel system, the channels are changed via a sync process that sends the channel change from the receiver to the transmitter and can be changed in seconds as needed.  Compatible with A1, A2, AH, and A4 transmitters *dependent on region and availability.

 

The Air system is shipped with an aluminum carrying case for protection however is small enough to pack in a horn case or carry-on for ease of travel.  The system in combination with an Evno microphone produces the most natural reproduction of an acoustic instrument on the market.

 

The Evno Air Wireless System offers a complete package for musicians seeking a portable, high-quality wireless solution for their Evno Microphone. The system includes all necessary components to ensure a seamless and reliable performance experience.

Receiver:
    •    Frequency Range: 902-928 MHz
    •    Receive Sensitivity: -110 dBm (sinad ≥30 dB)
    •    Signal/Noise Ratio: >105 dB
    •    Power Supply: DC 12V / 500 mA
    •    Audio Output: 1- 1/4 inch
    •    Antenna:  Detachable, Dual

Transmitter:
    •    Frequency Range: 902-928 MHz
    •    RF Power: 10 mW
    •    Microphone Type: Condenser
    •    Directivity: Cardioid
    •    Deviation: ±48 KHz
    •    Antenna: 1/4 wave length wire type
    •    Battery Voltage: 1.5V (1x1.5V AA Battery)
    •    Power Consumption: 14 hours, battery-dependent

SYSTEM SPECIFICATION:

  • Comprehensive Performance
  • Frequency Range: 902-928MHz, 823-832Mhz
  • Modulation Mode: FM
  • Dynamic Range: >100dB
  • Frequency Response: 60Hz-17KHz±3dB
  • Total Harmonic Distortion: <0.5% at 1KHz
  • Signal/Noise Ratio: ≥108dB 
  • Distance: Up to 250 feet / 80 m 
     

Each package includes:
    •    Instrument-specific microphone: Tailored to the acoustic properties of the specific instrument.
    •    Complete Air Wireless System: Ensures high-quality wireless audio, with Diversity receiver, and attached antennas

  • Air Compact Receiver: For robust and reliable audio reception.
  • 1/4 Inch (6.35 mm) Audio Cable
  • Power Adaptor: Ensures consistent power supply. Optionally powered by 2 (AA) batteries.
  • User Guide: Comprehensive instructions for setup and use.
  • Rugged Aluminum Carrying Case: Durable and protective for easy transport.
  • Evno A1 Wireless Clip-On Instrument Microphone Transmitter: High-quality audio transmission belt pack-free design.

Setup and Configuration
    •    Power Supply: Includes a 9V power supply for easy setup.
    •    Channel Selection: Features 99 available channels that can be quickly changed using an IR sync process, allowing for rapid adjustments on stage.
    •    Compatibility: Can be used with up to 5-6 systems simultaneously, making it ideal for horn style bands. Compatible with other Evno systems (Air, W2) and transmitters (A2, AH, A4), depending on region and availability.
    •    Frequency Ranges:
    ◦    900-928 MHz: For the United States, Brazil, Canada, and other free frequency regions. *See additional information for all regions including South America.

902-928MHz Countries of operation:

Australia (915-928MHz)
Brazil (902-907, 915-927.75MHz)
Canada
Columbia
Costa Rica
Dominican Republic
Ecuador
Guyana
Hong Kong (923-925MHz)
Indonesia (923-925MHz)
Mexico
New Zealand (915-928Mhz)
Paraguay
Peru
Puerto Rico
South Korea (925-928)
Venezuela
United States of America

Craftsmanship and Features

Evno Air Receiver

Compact yet powerful professional wireless system, perfect for travel. Complete with 1/4 inch output ideal for microphone inputs and D.I. boxes.  The Air system is ideal for quick setups and travel while maintaining a high sonic quality in combination with an Evno designed microphone.  Using the same technology as the W1 and W2 systems the Air is Evno’s compact version.  Folding antennas and a small footprint allow for portability in a compact setup.  Powered by a provided 9V power supply the system also offers a battery option for power.  Using 2 (AA) batteries in the receiver powers the system for 4 hours of continuous use in situations where the power is not available making it possible to use the system in remote locations as needed.  

Evno A1 Transmitter

Beltpack free transmitter clips to an Evno Microphone.

Air Controls

Evno Air Case

Included with an Evno Air Wireless System

Additional Recomendations

EVNO FEATURED ACCESSORIES