973-975-9917
ron@evnomicrophones.com
Currency
Main Features
W2 Description
CLX Description
Specs
Included
Setup and Configuration
Frequency by
Region
Evno W2 Dual Wireless System
≈ Transmit 2 microphones / transmitters at same time
≈ Two XLR outputs for separate EQ for each instrument
≈ 100-meter (328ft) Range
≈ UHF with 100 selectable channels - region dependent
≈ Metal Chassis with rack ears / kit included
≈ IR Sync for quick channel changes
≈ Removable Antennas with BNC connectors
≈ Compatible with A1, A2, A4, & AH transmitters
≈ LCD Display shows frequency, audio, and RF signals
Evno CLX Clarinet Microphone System
≈ Designed specific for Clarinet
≈ Single output with 70% / 30% balance from top of instrument to bottom
≈ Anodized aluminum clamp for strong secure barrel mounting
≈ Capsule captures soft to lead style playing with great detail
≈ 5.5” and 4” Flex-stay Gooseneck holds positions as needed
The Evno W2 is a dual wireless system specifically designed to accommodate two Evno microphones active at the same time. This allows for the player to use any combination of Evno microphones wireless at the same. A flute, clarinet, or saxophone etc, can both be active to use at the same time depending on what your particular needs maybe. Independent (2) XLR outputs offer separate control of each microphone / transmitter for greater control of EQ and volume over each channel. The W2 offers a Diversity antenna system which provides a distance at about 100meters.
The Evno W2 dual wireless operates two separate antennas, one for each side of the receiver / microphone / transmitter. The W2 is housed in a metal chassis with 2-XLR and 1-1/4in output which mirrors side in the case where you need a 1/4in output. A 1/2 rack-mountable design, the system come with a rack-kit and extension cables to place in a standard rack unit. The extension kit places the antennas on the front of the of the rack case allowing quick removal of the antennas for storage. The antennas disconnect with an BNC locking connector to either the back or front when racked.
Powered by an included power supply is easy to setup. The available 99 channels are changed with with a sync’ing process that sends the signal from the receiver to the transmitters with IR. Easy to change quickly on stage. Use of 5-6 systems simultaneously allows for horn style bands of all types to use an Evno belt-pack free wireless system. The W2 can also be used along side the Air and W1 systems and are not only compatible with both but also compatible with the A2, AH, and A4 transmitters. *Dependent on region and availability.
The W2 system is available in the 900-928MHz range for the United States, Brazil, Canada, and other free frequency regions. **see chart below for more information.
The W2 system is shipped with a rack-kit, antennas, power supply, extension cables, and the A1 transmitter to combine with an Evno microphone. The system in combination with an Evno microphone produces the most natural reproduction of an acoustic instrument on the market. For dual operation, a 2nd transmitter and microphone must be selected and purchased as desired and needed.
The Evno W2 Dual Wireless System offers a complete package for musicians seeking a rack mountable, high-quality dual wireless solution for their Evno Microphone. The system includes all necessary components to ensure a seamless and reliable performance experience. Here’s what’s included:
1. Dual Receiver: This receiver can handle signals from two separate transmitters simultaneously, providing the ability to use two microphones at the same time.
2. Rack Mount Kit: Allows the receiver to be securely mounted in a standard equipment rack, ensuring organized and stable installation.
3. 2 BNC Antennas: These antennas are used to capture the wireless signals from the transmitters.
4. Power Supply: Provides correct power the receiver unit.
5. User Guide: Provides detailed instructions for setting up and operating the system.
6. EVNO A1 Wireless Clip-On Instrument Microphone Transmitter: A wireless transmitter designed to clip onto an instrument, transmitting audio signals wirelessly to the receiver.
The EVNO CLX clarinet microphone system is designed and manufactured by hand in the USA. The microphone is designed specifically for clarinet and oboe. A bell mounted setup designed to produce the most natural reproduction of sound possible while allowing for the most gain before feedback. The double microphone design has a predetermined mix allowing the frequencies over the bell to be greater than the bell to achieve the most natural sound of the instrument as possible. Similar to the SPX2 the CLX has many of the same characteristics however varies in several ways to accurately accommodate the clarinet. The CLX double microphone design includes two elements tuned specifically for clarinet and oboe and suited to address all the problems that are common in mic’ing a lower volume instrument. The microphone will allow you to be heard as you sound without coloration, giving the audience a true representation of the sound the player works a lifetime to develop.
The CLX is the perfect choice from solo performance settings, principal soloist’s in all genres, to high energy horn section bands of all styles. From orchestral musicians to jazz, folk, klezmer, polka, and marching band the CLX will give you a setup where all the nuances of the instrument can be heard. Each genre and player has a different sound and by keeping the microphone flatly EQ’d, you’ll sound like YOU sound without coloration. The system can be used in low to high volume applications without the worry of saturating the element due to volume or high end feedback from surrounding instruments. The CLX is the ideal choice for clarinet and oboe players playing not only as a principal soloist but in sections alike. Clarinet quartets, trios, and marching band sections alike are able to use the microphone wired or wireless as desired. The Evno designed clamp allows for perfect placement above the bell of the clarinet by putting the upper head of the microphone at the perfect point above the keys and the lower microphone in front of the bell.
The gooseneck allows movement away from the body of the instrument and the bell as needed to accommodate fingers and key movement. The microphone is easy to place on and take off the instrument with a screw tightening clamp while always being attached at the perfect height. The gooseneck in from the bell allows movement to place on an instrument stand. The CLX gooseneck, designed in the USA, holds position as desired while being lightweight in design. The microphone itself is built with perfect venting as well as a highly attractive machining process creating a beautiful look while allowing the frequencies of the instrument to fully be captured by the microphone itself. Suspended in two standard variable 7 point suspensions, the microphone allows for simple and easy replacements of the O rings as needed. The microphone body is terminated with a 3 pin mini XLR connection which is used for both wired and wireless connections.
The microphone system can be used wired or wirelessly. The Evno CLX is shipped with the PS95 power supply for wired use while still being adaptable and ready to use with Evno, Shure, AKG, or Sennheiser wireless systems. (AKG and Sennheiser cables ordered separately to mate the microphone with another brand wireless or available in a package with the microphone and cable for customers who already own an Evno, AKG, Shure, or Sennheiser system.) The included cable with the CLX system works both with the Evno PS95 phantom power adapter, and Shure wireless transmitters. By-pass the cable to connect to Evno clip-on wireless transmitters. Additional packages include the CLX system with Evno Wireless or the CLX microphone setup directly for use with Shure, AKG, or Sennheiser wireless systems.
Receiver:
• Frequency Range: 902-928 MHz, 823-832 MHz
• Receive Sensitivity: -110 dBm (sinad ≥30 dB)
• Signal/Noise Ratio: >105 dB
• Power Supply: DC 12V / 500 mA
• Audio Output: 2-XLR, 1-1/4 inch
• Antenna: Diversity, Detachable
Transmitter:
• Frequency Range: 902-928 MHz, 823-832 MHz
• RF Power: 10 mW
• Microphone Type: Condenser
• Directivity: Cardioid
• Deviation: ±48 KHz
• Antenna: 1/4 wave length wire type
• Battery Voltage: 1.5V (1x1.5V AA Battery)
• Power Consumption: 14 hours, battery-dependent
System Specifications:
• Frequency Range: 902-928 MHz, 823-832 MHz
• Modulation Mode: FM
• Dynamic Range: >100 dB
• Frequency Response: 60 Hz - 17 KHz ± 3 dB
• Total Harmonic Distortion: <0.5% at 1 KHz
• Signal/Noise Ratio: ≥108 dB
• Distance: Up to 500 feet / 150 m
Each package includes:
• Instrument-specific microphone: Tailored to the acoustic properties of the specific instrument.
• Complete W2 Wireless System: Ensures high-quality wireless audio, with Diversity receiver, and rack mountable.
Setup and Configuration
• Power Supply: Includes a 12V power supply for easy setup.
• Channel Selection: Features 99 available channels that can be quickly changed using an IR sync process, allowing for rapid adjustments on stage.
• Compatibility: Can be used with up to 5-6 systems simultaneously, making it ideal for horn style bands. Compatible with other Evno systems (Air, W2) and transmitters (A2, AH, A4), depending on region and availability.
• Frequency Ranges:
◦ 900-928 MHz: For the United States, Brazil, Canada, and other free frequency regions. *See additional information for all regions including South America.
◦ 823-832 MHz: For most territories in Europe. *See additional information for all regions including Australia.
902-928MHz Countries of operation:
Australia (915-928MHz)
Brazil (902-907, 915-927.75MHz)
Canada
Columbia
Costa Rica
Dominican Republic
Ecuador
Guyana
Hong Kong (923-925MHz)
Indonesia (923-925MHz)
Mexico
New Zealand (915-928Mhz)
Paraguay
Peru
Puerto Rico
South Korea (925-928)
Venezuela
United States of America
823-832Mhz Countries of operation:
Austria
Belgium
Bosnia and Herzegovina
Bulgaria
Cyprus
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Ireland
Italy
Latvia
Lithuania
Luxembourg
Malta
The Netherlands
Norway
Portugal
Romania (823-826)
Serbia
Spain / Andorra
South Africa
Sweden
Switzerland
United Arab Emirates
United Kingdom
Ukraine
The Evno W2 is a dual wireless system specifically designed to accommodate two Evno microphones active at the same time. This allows for the player to use any combination of Evno microphones wireless at the same. A flute, clarinet, or saxophone etc, can both be active to use at the same time depending on what your particular needs maybe. Independent (2) XLR outputs offer separate control of each microphone / transmitter for greater control of EQ and volume over each channel. The W2 offers a Diversity antenna system which provides a distance at about 100meters.
Beltpack free transmitter clips to an Evno Microphone.
All parts are made by hand and assembled in the USA!
5.5” Flex-stay Gooseneck holds position as desired
The CLX-W1 can be converted to wired use (non wireless) with the PS95 Preamp / Power supply.
All parts are made by hand and assembled in the USA!
Additional Recomendations
FIND YOUR ANSWERS HERE
FREQUENTLY ASKED QUESTIONS
Can I use the microphone wireless?
All Evno microphone packages are designed to be compatible with wireless setups. While each package includes specific components tailored to the chosen setup, the microphone itself is versatile and can be seamlessly integrated with any configuration, including wireless.
Can I use my Evno microphone with other brands of wireless?
Yes, EVNO microphones are designed to be versatile and compatible with various other popular wireless systems, including those from Shure, Sennheiser, AKG, and McCormick. To ensure seamless integration, you will need the correct adapter cable for each brand.
What is the best EVNO wireless setup?
When selecting the best wireless setup from EVNO Microphone Systems, it's essential to consider your specific needs and performance requirements. EVNO offers three distinct wireless options, each catering to different scenarios while maintaining top-notch sound quality across the board.
W1 - True Diversity
W2 - Dual Wireless
Air - Perfect travel size and quick and easy setups.
Please see our education page for more information.
What Is Phantom power?
Phantom power is direct current (DC) electric power that is applied equally to both signal wires of a balanced microphone cable. Phantom power supplies are most often built into mixing consoles and microphone preamps. The purpose of Phantom power is to supply 48 volts of current to microphones that have built-in active circuitry over the same cable that is used to send the microphone’s signal back to the mixer or preamp. Since there is no visible power supply unit (like those common with tube microphones) the term Phantom power is used.
Do you offer a belt pack style transmitter with a volume control?
Yes, Evno offers the A2 belt pack transmitter for musicians who prefer an on-body transmitter. The A2 includes a convenient volume control, allowing players to adjust their sound levels effortlessly.
Do you have a hand held wireless microphone?
Yes, Evno offers the AH handheld microphone which sync’s to the W1, W2, and Air receivers. The most common setup would be to combine the AH with W2 Dual receiver to have both a wireless horn microphone and hand held active at the same time.
Where do I order an Evno Microphone?
Evno Microphones are available at our growing number of dealers. The dealer can assist you with your buying needs. See current dealers page for more information. If a dealer does not have stock, you can order directly on our website. For a list of distributors and dealers outside of the USA, please also see the dealers page.
Thanks for subscribing!
This email has been registered!
